home page>Product Center> Voltage feedback

Product images are for illustrative purposes only
Product details are welcome upon request

OPA698M

Category:Voltage feedback
Product Name:Unity-gain stable wideband voltage limiting amplifier
Manufacturers:TI
Production Batch Number:10+
Encapsulation:8CDIP SB
Stock Status:There is stock
Stock Quantity:5000
Minimum order quantity: 1
Details:

Product introduction

The OPA698 is a wideband, unity-gain regulated voltage feedback operational amplifier that provides bipolar output voltage limiting. When an output voltage control driver that takes double-buffering limits, it attempts to exceed these limits. This new output limits the building preservation limiter offset error to ± 15 millivolts. The op amp operates linearly at an output voltage limit of 30 mV.

The narrow range and low nonlinearity combined to limit the offsetting allowable limit voltage are set at the ideal linear output range of 100 mV. A fast 1-ns recovery ensures that the signal from limiting the overload signal will be transparent to the signal path. In implementation relative to the input and output, the limit function gives a specified accuracy limit for any gain and allows the OPA698 to be used in all standard op amp applications.

characteristic

High linearity near limit
Fast recovery from high speed: 1 nanosecond
Limit voltage accuracy: ± 15 millivolts
- 3 - 3dB bandwidth (at G = +1): 450 MHz
Slew rate: 1100 V/ms Details
± 5 V and 5 V power supplies
Unity OPA699 gain version
apply
- Fast ADC input buffer limit
- The pixel clock of the CCD dissolves
- Video synchronous stripping
- High frequency mixer
- IF limiting amplifier
- Amplitude modulation signal generator
- Nonlinear analog signal processing
- OPA688M replacement

parameter

	OPA698M
Pins/Packets	8CDIP Security Bureau
Operating temperature range(°C)	-55 to 125

andOPA698MRelated ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
PMV65XP	NXP	11+	SOT-23-3	P-channel TrenchMOS(tm) extremely low level FET - Configuration: Single P-channel; ID DC: 3.9 A; Qgd (typ): 0.65 nC; RDS(on): 76@4.5
OPA699M	TI	10+	8CDIP SB	Gain +4 stabilized wideband voltage limiting amplifier
OPA699	TI	10+	8SOIC	OPA699: Wideband High Gain Voltage Limiting Amplifier
2N7002E	NXP	11+	SOT-23	N-channel Enhanced FET N-channel TrenchMOS FET - Configuration: Single N-channel; ID DC: 0.3 A; RDS(on): 4400@10V5300@4.5V mOhm; VDSmax: 60 V
2N7002K	NXP	11+	SOT-23	N-channel Enhanced FET N-channel TrenchMOS FET - Configuration: Single N-channel; ID DC: 0.3 A; RDS(on): 4400@10V5300@4.5V mOhm; VDSmax: 60 V
BSN20	NXP	11+	SOT-23	N-channel enhancement mode field-effect transistor - Configuration: Single N-channel; ID DC: 0.173 A; RDS(on): 15000@10V20000@5V mOhm;
PMBF170	NXP	11+	SOT-23	N-Channel Enhanced FET Standalone 750mA Li-Ion Battery Charger in 2 x 2 DFN; Package: DFN; No of Pins: 6; Temperature Range: -40°C to +125°C
OPA690	TI	10+	6SOT-23, 8SOIC	Wideband voltage feedback op amp with disable function
OPA657	TI	10+	5SOT-23, 8SOIC	1.6GHz low noise FET input op amp
TPS60300	TI	09+	MSOP-10	Single Cell to 3.0V/3.3V, 20mA Dual Output, High Efficiency Charge Pump

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
CL1215-02P72ET-U2	Schaltbau	2023+	Contactors	CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2	Schaltbau	2023+	Contactors	1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
D-U204N-KLCQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
MIP30F00830-S1048	Amphenol Positronic	2023+	connector	MIP series connectors
C163C/110EV-R1	Schaltebao	2023+	Contactors	Contactors
F670-H4V-XUU	LEACH	2023+	Relays	F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU	LEACH	2023+	Relays	F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20	SCHMERSAL	2023+	switch	Safety switches
RX2025GE1	Surio	2023+	connector	Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24	Surio	2023+	connector	Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMPSE06T36M2SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMP18T28M13SV0N	AB Connectors	2023+	connector	RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0	AB Connectors	2023+	connector	Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D	samtec	2023+	connector	Classic PCB Header Strips, 0.100" pitch
TNL22ERT-62	ABB	2016+	Contactors	4P St Contactor Relay 77-143Vdc \|Abb TNL22ERT-62
62EM1-00001	Microchip	2023+	Development board	AgileSwitch® 62mm Electrical Master SiC Gate Driver Board
E2E-X7D212-R2M	Omron	2023+	sensor	Standard Proximity Sensor
E2E-X7D212-R5M	Omron	2023+	sensor	Standard Proximity Sensor

TI brand product recommendation

Model	Manufacturers	lot number	encapsulation	illustrate
OPA690	TI	10+	6SOT-23, 8SOIC	Wideband voltage feedback op amp with disable function
OPA657	TI	10+	5SOT-23, 8SOIC	1.6GHz low noise FET input op amp
TPS60300	TI	09+	MSOP-10	Single Cell to 3.0V/3.3V, 20mA Dual Output, High Efficiency Charge Pump
TPS60243	TI	09+	MSOP-8	170 uVrms zero-ripple switched capacitor boost converter with fixed 3V output for VCO supply
TPS60242	TI	11+	MSOP-8	170 uVrms zero-ripple switched capacitor boost converter with fixed 2.7V output for VCO supply
TPS60241	TI	2010	MSOP8	170 uVrms zero-ripple switched capacitor boost converter with fixed 5.0V output for VCO supplies
OPA656	TI	09+	5SOT-23, 8SOIC	Wideband unity-gain regulated FET input op amp
TPS60240	TI	11+	MSOP8	170 uVrms zero-ripple switched capacitor boost converter with fixed 3.3V output for VCO supply
TPS60231	TI	10+	QFN16	3-channel, 75mA regulated charge pump for LED backlight in 3x3 QFN package Notify me when this product changes
OPA4830	TI	10+	14TSSOP	Low power single-supply wideband op amp
OPA4820	TI	09+	14SOIC, 14TSSOP	Quad, unity-gain, low noise, voltage feedback op amps
OPA3690	TI	10+	16SOIC, 16SSOP/QSOP	Three wideband voltage feedback op amps with disable function
OPA355	TI	07+	6SOT-23, 8SOIC	2.5V 200MHz GBW CMOS single op amp with off-state
OPA2890	TI	09+	10MSOP, 8SOIC	Dual low-power, wideband voltage feedback op amps with disable function
OPA2889	TI	10+	10MSOP, 8SOIC	The dual, low-power, wideband, feedback op amp has a disable voltage
OPA2846	TI	08+	8SOIC	Dual wideband, low noise voltage feedback operational amplifiers
TPS60230	TI	08+	QFN16	5-channel, 125mA regulated current charge pump in a 3x3 QFN package for white LED backlighting
OPA2830	TI	09+	8MSOP, 8SOIC	Two, low-power, single-supply wideband op amps
OPA2822	TI	08+	8MSOP, 8SOIC	SpeedPlus dual wideband low noise operational amplifiers
TPS60213	TI	10+	MSOP-10	Regulated 3.3V 50mA low ripple charge pump with ultra-low operating current