SDT600-X

• Product introduction

The SDT600-X consists of phototransistors photo-coupled to light-emitting diodes. Optical coupling between the input IR LED and the output phototransistor allows high isolation levels while maintaining low DC signal control capability. The SDT600—X provides an optically isolated method for controlling many interface applications such as telecommunications, industrial control, and instrumentation circuits.

The SDT600 to X is standard in a tiny 6-pin DIP package.

apply

Registration, copiers, vending machines
System instruments, measuring instruments
Computer terminals, PLCs
Telecommunications equipment, telephones
Household appliances
Digital logic input
Microprocessor input
Switching power supply

features

VCEO＝60V
Small 6-pin impregnated/SMD package
No underlying connectivity
Low input power consumption
High stability
CTR range 40-320%
High isolation voltage (5000 volts)
Long life / high reliability
ROHS/Pb freedom/achieve compliance

Agency approval

UL/C-UL: File αE201932
VDE: File α40035191 (EN 6074-5-2)

Absolute maximum rating

The values indicated are absolute stress ratings. These or any of these conditions, defined in the Electrical Characteristics section of this document, do not imply the functional operation of the device. Exposure to absolute maximum ratings can cause permanent damage to equipment and can adversely affect reliability.

Storage Temperature ................................-55 to +125°C

 Operating Temperature ...........................-40to+100°C

Continuous Input Current ......................................50mA

 Transient Input Current .......................................500mA

Reverse Input Control Voltage ................................... 6V

Input PowerDissipation....................................... 40mW

Total Power Dissipation ...................................200mW

Solder Temperature–Wave (10sec).......................260°C

 Solder Temperature– IRReflow (10sec)..................260°C