illustrate

This SN65HVD1040 meets or exceeds the specifications of ISO 11898 for the use of applications in the Employer Controller Area Network (CAN) application. Thanks to the CAN transceiver, these devices provide differential transmit and receive signal rates up to 1) megabits per second (Mbps) in the CAN controller. （1）

Specially designed for harsh operating environments, the device has ± 12 kV ESD protection on buses and cotter pins, cross lines, overvoltage and ground protection against losses of -27 to 40 V, overheat shutdown, -12 V to 12 V common mode range, and can withstand -200 transient voltages of 200 V according to ISO 7637.

(1) The conversion rate of the A-line signal is the voltage of the base point is the unit expressed per second (second digit).

characteristic

• Improved easy replacement with TJA1040
• ± 12 kV ESD protection
• Low-current standby mode and bus wake-up: 5μA typical
• Bus fault protection - 27 V to 40 V
• Robust split foot bus stability
• Explicit timeout function
• Power-Up/Down disturbance-free bus inputs and outputs
  • High input impedance low V CC
  • In the output power of the bicycle is monotonous
• DeviceNet Vendor Number: 806
• apply
  • Battery-powered applications
  • Handheld diagnostics
  • Medical Scan Imaging
  • HVAC
  • Security system
  • Telecom base station status and control
  • SAE's J1939 data bus interface standard
  • 2000 standard NMEA data bus interface
  • Data bus interface of the International Standards Organization 11783 standard