SN65HVD234

illustrate

The SN65HVD233, SN65HVD234 and SN65HVD235 are used in the Employer Controller Area Network (CAN) application according to the physical layer of serial communication with the ISO 11898 standard. As a CAN transceiver, each provides the difference between the transmitting and receiving CAN bus and CAN controller functions with signal transmission rates of up to 1 Mbps.

Designed for operation in particularly harsh environments, the device features cross-wire, over-voltage and over-temperature protection, grounding protection ± 100 V transient protection device in common mode± 36 V loss, in a 7-V operation with a maximum range of 12-V common mode with 60 nodes on the bus.

If the common mode range is limited to -2 V to 7 volts according to the ISO-11898 standard, up to 120 nodes can be connected on the bus.

characteristic

• Bus pin fault protection over ± 36 volts
• The bus pins are ESD protected for more than 16 kV HBM
• Gifts/ICT Standards (SN65HVD234)
• ISO 11898 compliant
• Signal transmission rate (1) up to 1 Mbps
• Extended - 7 - V to 12 V common mode range
• The high input impedance allows for 120 nodes
• The I/O of the LVTTL is 5-V fault tolerance
• Adjustable driver quality improved signal conversion time
• The nodes of electricity do not interfere with the bus
• Low current standby mode. 。 。 200μA typical
• Low current sleep mode. 。 。 50 nA typical (SN65HVD234)
• Thermal shutdown protection
• Power-Up/Down disturbance-free bus inputs and outputs
  • High and low V input impedance with CC
  • Output power bicycle in a single piece
• Loopback Available Diagnostics (SN65HVD233)
• Loopback for Auto Baud Rate Function Available (SN65HVD235)
• DeviceNet Vendor Number: 806
• apply