SP3073EEN-L

• Product introduction

    ± 15kV ESD protected RS485 pin
    3.3V low-power operation
    Advanced receiver fail-safe protection, open, short or stop wire
    Up to 256 transceivers can share the bus
    Ideal for low loads and larger 8x fan-out
    Hot-swappable fail-protected rare earths and DEs
    Thermal shutdown prevents drivers from contending
    There are three industry-standard footprints
        SP3070E, SP3073E and full-duplex SP3076E (14-pin)
        SP3071E, SP3074E and full-duplex SP3077E (8-pin)
        SP3072E, SP3075E, and Half-Duplex SP3078E (8-pin)
    Three app-optimized speed levels
        SP3070 - 72E: 250kbps full swing limited
        SP3073 - 75E: 500kbps pendulum limited
        SP3076 - 78E: High speed of 16Mbps
    Su small size narrow package
    Industrial (-40 to +85°C) and extended (-40 to +125 º C) temperature grades

illustrate
The SP3070E-3078E differential line transceiver is based on a balanced multipoint bus bidirectional communication transmission line suitable for both EIA compliant RS485 and RS422 standards.Each device includes a differential driver and differential receiver.All devices operate from a 3.3V supply.

The high receiver input impedance allows a large number of receivers and receivers to share a common data bus without excessive maintenance and loading or the amplitude of expensive repeater signals.The high impedance driver output is maintained over the entire common-mode voltage range from -7 to +12 VWhen the receiver outputs fail-safe as Logic 1, the input is open, shorted, or terminated.The driver includes built-in short-circuit protection and thermal overload shutdown to prevent excessive power consumption from bus contention or cable failures.All receiver inputs and RS485 driver outputs are ESD protected up to ± 15kV (air gap and mannequin) and up to ± 8kV contact discharge (IEC 1000-4-2).