SP3075EEN-L

• Product Introduction

peculiarity     ± 15kV ESD-protected RS485 pins     3.3V low-power operation     Advanced receiver fail-safe protection, open-circuit, short-circuit, or termination line     Up to 256 transceivers can share the bus     Ideal for low load larger 8x fan-out     Hot-swappable fault protection for rare earths and DE     Thermal shutdown prevents drivers from fighting     There are three industry-standard footprints         SP3070E, SP3073E and full-duplex SP3076E (14 pins)         SP3071E, SP3074E and full-duplex SP3077E (8 pins)         SP3072E, SP3075E and half-duplex SP3078E (8 pins)     Three app-optimized speed levels         SP3070-72E: Limited full pendulum at 250kbps         SP3073-75E: Limited pendulum at 500kbps         SP3076-78E: High speed of 16Mbps     Su small size and narrow package     Industrial (-40 to +85°C) and extended (-40 to +125ºC) temperature ratings Description The SP3070E-3078E differential line transceiver is based on a balanced multipoint bus bidirectional communication transmission line and is suitable for both EIA compliant RS485 and RS422. Each device includes a differential driver and differential receiver. All devices operate from a 3.3V supply. High receiver input impedance allows a large number of transceivers to share a common data bus without the amplitude of excessive maintenance and loading or using expensive repeater signals. The high-impedance driver output is maintained over the entire common-mode voltage range from -7 to +12 V when the receiver fails safe to output as logic 1, input open, short, or terminate. The driver includes built-in short-circuit protection and thermal overload shutdown to prevent excessive power consumption from bus contention or cable failure. All receiver inputs and RS485 driver outputs are ESD protected up to ± 15kV (air-gapped and mannequin) and up to ± 8kV contact discharge (IEC 1000-4-2).