SSR-25AA
Product images are for illustrative purposes only
Product details are welcome upon request

SSR-25AA

  • Category:Relays
  • Product Name:Single-phase solid state relays
  • Manufacturers:FOTEK
  • Production Batch Number:10+
  • Encapsulation:DIP
  • Stock Status:There is stock
  • Stock Quantity:2000
  • Minimum order quantity: 1
  • Details:Click here to find a pdf of the SSR-25AA
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

SSR-25AA Single Phase Solid State Relay

 

SSR-AA

1. Product features:
1. Triac output, zero voltage on, zero current shutdown;
2. Optoelectronic isolation between input loop and output loop;
3. The isolation withstand voltage between input end and output end is 2500V;
4. 100% load current aging test, through the European Community CE certification, international ISO9000 certification, domestic 3C certification.

II. Model Description:

III. Technical Parameters:

single
appearance
Handed over
flow
solid
state
continue
electricity
utensil

Product model

SSR-10AA  SSR-25AA   SSR-10AA-H   SSR-25AA-H
SSR-40AA  SSR-50AA   SSR-40AA-H   SSR-50AA-H
SSR-60AA  SSR-75AA   SSR-50AA-H   SSR-75AA-H
SSR-90AA                         SSR-90AA-H

Control mode AC-AC  
Load current 10A、25A、40A、50A、60A、75A、90A
Load voltage 24-380VAC 、H:90-480VAC
Control voltage 80-250VAC
Control the current AC:12mA
On-state leakage current ≤2mA
On-state buck ≤1.5VAC
Out-of-state time ≤10mS
The medium is pressure-resistant 2500VAC
Insulation resistance 500MΩ/500VDC
Ambient temperature -30℃-+75℃
Installation method Bolted on
Work instructions LED
weight 132g


IV. Product Application:
SSR series solid state relay adopts flame retardant engineering plastic shell, epoxy resin potting, threaded lead end wiring, with high structural strength, impact resistance, strong vibration resistance, small input terminal driving current can be easily interfaced with computer terminals and various digital program-controlled circuits, widely used in petrochemical instruments and equipment, food machinery, packaging machinery, textile machinery, CNC machine tools, plastic machinery, fitness equipment, entertainment facilities and other automation control fields.
Especially suitable for corrosion, humidity, dustproof, explosion-proof and other harsh environments, and frequent switching occasions, is AC contactor update replacement products.

V. Safety Precautions:
1. When the load current is higher than 5A, a radiator must be used or installed on a metal base plate with corresponding heat dissipation effect, and the heat dissipation base plate of the solid state relay and the installation surface are coated with thermal grease, and a fan above 40A is strongly cooled or water-cooled.
2. When used in inductive loads, high transient voltages and inrush currents are applied to the output, so it may cause misleading or damage to the solid state relay, and it is usually necessary to connect a voltage control device with a specific clamping voltage at the output, such as a bidirectional regulator diode or varistor (MOV). Varistors are recommended to be 1.6-1.9 times the rated voltage.
3. When controlling a smaller load current load close to the minimum load current, a virtual load resistor must be connected in parallel to the load to reduce the leakage current at the output end and generate a higher residual voltage on the load.
4. In order to avoid the temperature rise of the solid-state relay exceeding the allowable value, the heat dissipation effect and installation position should be considered when designing and applying, and when two or more solid-state relays are installed side by side, an appropriate spacing should be left.
5. The output ends of multiple solid-state relays must not be used in parallel to try to increase the output current. However, the outputs can be used in series to accommodate higher operating voltages.
6. When multiple solid-state successives share a control power supply, the input can be used in series or in parallel.
7. Please use this piece with caution for capacitive load, please choose a special solid state relay for capacitive load.

 

andSSR-25AARelated ICs are:


Model Manufacturers lot number encapsulation illustrate
SSR-50AA-H FOTEK 10+ DIP Single-phase solid state relays
SSR-40AA-H FOTEK 13+ DIP Single-phase solid state relays
SSR-50AA FOTEK 10+ DIP Single-phase solid state relays
SSR-25AA-H FOTEK 10+ DIP Single-phase solid state relays
SSR-10AA-H FOTEK 10+ DIP Single-phase solid state relays
SSR-10AA FOTEK 10+ DIP Single-phase solid state relays
LM98516CCMTX NXP 10+ TSSOP 10-bit, 65 MSPS 6-channel imaging signal processor
SSR-40AA SSR 10+ module 40a single phase AC control AC Yangming FOTEK solid state relay AC control AC SSR-40AA 220V
DG419DY-T1 VISHAY 10+ SO-8 Precision CMOS analog switches
DG419DY VISHAY 10+ SO-8 Precision CMOS analog switches

Popular searches


Model Manufacturers lot number encapsulation illustrate
DZ52-080Z300R024/OH Hartmann-Lammle 23+ module Hartmann-Lammle DZ52-080Z300R024/OH
1SVR040011R2500 ABB 2023+ converter Universal signal converter 110-240VAC 50/60Hz / 100-300VDC
EA12-NO-20-1-31-BD ROSS ENGINEERING 23+ Relays EA12-NO-20-1-31-BD High Voltage Relay
EA12-DT-20-1-31-BD ROSS ENGINEERING 2023+ module High voltage relays
ABCIRHSE06HC2214PCWF80 AB 2023 connector Connector Kit ABCIRH Series Connector Assemblies Brand New Original Imported International Stock
AS7C4096A-15JIN Alliance Memory Inc 23+ SOJ-36 AS7C4096A Series 4-Mbit (512 K x 8) 5 V 15 ns CMOS Static RAM - SOJ-36
US-625AXTLQE ASAHI KEIKI 2023+ weld Temperature sensor
V23154D735B110 TE 2023+ Relays Low Signal Relay - PCB V23154D 735B110
V23154D735F104 TE 23+ Relays Signal Relays, 250 VDC Contact Voltage, 250 VAC Contact Voltage, 806 mW Coil Power (DC), Printed Circuit Board, PCB-THT, Axicom Cradle Relay N
AZ16-12ZIBI-1747-M20 SCHMERSAL 2023+ switch Safety gate switch
PW70d(2x10432Ω/83°) FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
PW70d FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
HRF-AT4521-FL-TR Honeywell 10+11+ SMD RF ATTENUATOR 50OHM 16VQFN
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors

FOTEK brand product recommendation


Model Manufacturers lot number encapsulation illustrate
SSR-10AA FOTEK 10+ DIP Single-phase solid state relays

Categorical search