STM8L101F3U6

• Product Introduction

STM8L101F3U6

Ultra-low-power 8-bit MCU with 8 KB of flash memory, 16 MHz CPU, up to 2 kilobytes of EEPROM

The STM8L101xx low-power home features provide enhanced STM8 CPU core processing power (up to 16 MIPS at 16 MHz) and the benefits of the CISC architecture, while maintaining improved code density, a 24-bit linear addressing space and an optimized architecture for low-power operation.

The family includes an integrated debug module that allows for non-invasive application debugging and ultra-fast flash programming with hardware interface (SWIM).

All STM8L101xx microcontrollers feature low-power, low-voltage, single-supply flash program memory. 8 KB of device embedding data EEPROM.

A common set of STM8L101xx low-power families based on the most advanced peripherals for a country. The modular design of the peripheral set allows the same peripherals to be found in different ST microcontroller families, including 32-bit families. This makes it easy for any different home to transition and simplifies the use of a common set of development tools and even more.

All STM8L low-power products are based on the same architecture, the same memory mapping, and coherent leaderboards.

Key features: Main microcontroller function Supply voltage range from 1.65 V to 3.6 V Low power consumption (HALT: 0.3μA, active stop: 0.8 microamps, operating dynamics: 150μA/MHz) STM8 cores have a throughput of up to 16 human MIPS, Temperature. Range: -40 to 85°C and 125°C recall Up to 8 KB of flash memory program, including 2 bytes of data EEPROM Error Correction Code (ECC) Flexible protection modes for write and read In applications and in circuit programming Data EEPROM capabilities 1.5 bytes of static RAM Clock management Fast wake-up time (typical 4 microseconds internal 16 MHz RC) Internal low-power 38 kHz remote-controlled driving IWDG and AWU Reset and power management UltraSafe power supply ultra-low power consumption, power-on reset/power-down reset Three low-power modes: wait, active stop, stop Disruption management Nested interrupt controller software priority control Up to 29 external interrupt sources I/O Up to 30 I/O, all external interrupt vector mapping I/OS with prog. Input pull-up, high sink/source capability and an IR LED driver output peripheral Two 16-bit universal timers up and down counters and 2 channels (TIM2 and TIM3) for ICs, owners' corporations, PWM An 8-bit timer (TIM4) with a 7-bit pre-divider Infrared remote control (infrared) Independent watchdog Automatic wake-up unit Buzzer timer with a frequency of 1, 2 or 4 kHz SPI synchronous serial interface Fast I2C multi-master/from 400 kHz USART with Decimal Baud Rate Generator 2 4 inputs for each comparator Support development Hardware Single Wire Interface Module (SWIM) for fast on-chip programming and non-invasive debugging In Circuit Simulation (ICE) 96-bit unique ID