TAS5102

illustrate

The TAS5102/TAS5103 integrates a stereo digital amplifier power stage with an advanced protection system. The driving TAS5102/TAS5103 is up to 20 W/15 8Ω Bridge Load (BTL) W and low noise per channel integrated in the output, low THD+N performance and low power consumption capability idle.

A low-cost, hi-fi sound system can be built using TI's chipset, including a modulator (e.g., TAS5086) and a TAS5102/TAS5103. The system requires only a simple passive LC filter to demodulate and prove to be EMI compliant to provide high-quality, high-efficiency audio amplification. These devices require two power supplies at 3.3 VREG volts, and up to 23 PVDD five. The TAS5102/TAS5103 does not require a power-up sequence due to internal power-up reset.

characteristic

• 2 × 20 10% THD width + N is 8Ω at 18 V (with TAS5102 heatsink) BTL
• 2 × 15 10% THD width + n at 15.5 V TAS5103 is 8Ω BTL
• 2× 10 10% THD width + n at 13 V is 8 Ω BTL
• "100 dB signal-to-noise ratio (A-weighted)
• "0.1% THD + n at 1 watt
• Thermally Enhanced Package: 32-Pin HTSSOP
  • Dad (TAS5102) pad up
  • diammonium phosphate (TAS5103) pad
• High-efficiency power stage (90%) with 180Ω output MOSFET
• Wide PVDD range from 8V to 23V
• There is no protection power sequence when powering up, reset, and power-up
• Integrated self-protection circuit including undervoltage, overtemperature, overcurrent, short circuit
• Built-in gate drive power regulator
• Error reporting
• When electromagnetically compatible, the design of the recommended system is recommended
• apply
  • TV
  • Small/micro sound system
  • DVD receiver
  • Home theater