TAS5162

illustrate

The TAS5162 is a high-performance stereo digital amplifier power stage that integrates a complete protection system. The TAS5162 is capable of driving 6 -Bridge up to load (BTL) at THD = 10% at 210 W per channel, integrating low noise, low THD+N performance at the output with no clipping, idle, and low power consumption.

A low-cost, hi-fi sound system can be built using TI's chipset, including a modulator (e.g., TAS5508) and TAS5162.

The system requires only a simple passive LC filter to demodulate and prove to be EMI compliant to provide high-quality, high-efficiency audio amplification. This unit requires two supplies with a power of 12 GVDD and VDD, in PVDD V and 50V. The TAS5162 does not require a power-up sequence due to internal power-up reset.

characteristic

• 2 × 160 in 10% THD + to 8 N W -offline
• 2×210 at 10% THD+ to 6 Newton W -offline
• 1 × 300 10% THD+ to 4 N W-PBTL
• > 110 dB signal-to-noise ratio (A-weighted, TAS5518 modulator)
• Two thermally enhanced package options:
  • DKD (36-pin PSOP3)
  • Dichlorvos (44-pin HTSSOP)
• High efficiency power stage ("90%) with 80 meters Output MOSFETs
• There is no protection power sequence when powering up, reset, and power-up
• Integrated self-protection circuit including undervoltage, overtemperature, overload, short circuit
• Error reporting
• When electromagnetically compatible, the design of the recommended system is recommended
• Intelligent gate drive
• Mid-Levels-Z slope compatible to reduce 'pop noise'
• apply
  • Small/micro sound system
  • DVD receiver
  • Home theater