home page>Product Center> Current feedback

Product images are for illustrative purposes only
Product details are welcome upon request

THS3091

Category:Current feedback
Product Name:Single high voltage, low distortion current feedback operational amplifier
Manufacturers:TI
Production Batch Number:09+
Encapsulation:8SO PowerPAD, 8SOIC
Stock Status:There is stock
Stock Quantity:6530
Minimum order quantity: 1
Details:

Product introduction

The THS3091 and THS3095 are designed to operate in applications that require large, pin, power linear output signals for ± 5 V wide supply voltage range of ± 15 V current feedback amplifier FETs, and VDSL line drivers.

The THS3095 has a power-down pin（PD）In standby mode, this allows the amplifier to be low power and reduces the quiescent current from microamps to 500 by 9.5 mA.

The wide voltage range, total harmonic distortion of -69 dBc and low up to 10 MHz, in addition, combined with a high slew rate of 7300 V/microsecond make the THS3091/5 ideal for high voltage arbitrary waveform driver applications. In addition, the ability to handle large volumes of drove voltage fluctuations into high-impedance, high-capacitive loads while maintaining good settling time performance makes it ideal for drivers and PowerFET pin-driver application devices.

characteristic

Low distortion
- 77 dBc HD at 10 MHz, studied_{L for}1 thousand
- 10 MHz of HD3 at 69 dBc, studied_{L for}1 thousand
Low noise
- 14 nylon/ hertzNoninverting current noise
- 17 nylon/ hertzInverting current noise
- 2Nevada/ HzVoltage noise
High slew rate: 7300 V/μs (g = 5_forV O = 20_Vpeak-to-peak)
Wide bandwidth: 210 MHz (g = 2, research_{L for}100 ）
High output current drive: ± 250 mA
Wide supply voltage range: ± 5 V to ± 15 V
Power saving features: (THS3095pcs)
apply
- High voltage arbitrary waveform
- Power FET driver
- Pin driver
- Line drivers for VDSL

parameter

	THS3091
IQ per channel (max.) (mA)	11
Slew rate (typical) (V/US)	7300
Ganymede (typical) (mAh)	250
and (min) (v)	10
and (maximum) (v)	30
Number of channels	One
Pins/Packets	8SO will be PowerPAD, 8SOIC
ACL, the minimum stable gain (V/V).	One
ACL (MHz) of weight @	235
Differential Gain(%)	0.013
Phase error (degrees)	0.02
Violet (maximum) (millivolts)	4
Total harmonic distortion (CFC = 1 MHz) (typical) (dB)	-75
Settling time (0.1%) (typical) (nanoseconds)	72
Maximum offset voltage drift (+/-)((UV/Celsius)	10
Available channels	S
(typical) in the flat band Vn (Nevada/rtHz)	2
About. Price (USD)	3.30 \| 100u
Explosion protection (max.) (North America)	20000
Noninverting Input Current Noise (Yearly/rtHz)	14
Second harmonic (DBC).	66
Third harmonic (DBC).	74
@兆赫	10
Weight @ g = 2 (MHz)	210
0.1 dB bandwidth flatness (MHz)	95
Inverting Input Current Noise (Yearly/rtHz)	17
Operating temperature range(°C)	-40 to 85

andTHS3091Related ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
85996630913	SOURIAU	17+	connector	FEMALE CRIM P CONTACT, SIZE #4, GOLD PLATING
0676430910	Molex	16+	connector	Universal Serial Bus (USB) Shielded I/O Receptacle Right Angle Type A Black
676430910	Molex	16+	connector	Universal Serial Bus (USB) Shielded I/O Receptacle Right Angle Type A Black
67298-3091	Molex	10+		Conn USB RCP 8 POS Solder RA Thru-Hole 8Terminal 2Port Tray
MMA02040C3091FB300	VISHAY	10+	0	Professional wafer resistors
SC74993DR2(MC33091A)	Motorola	00+	SOP-8	Brand new original
THS3091	TI	09+	8SO PowerPAD, 8SOIC	Single high voltage, low distortion current feedback operational amplifier

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
ABCIRHSE06HC2214PCWF80	AB	2023	connector	Connector Kit ABCIRH Series Connector Assemblies Brand New Original Imported International Stock
AS7C4096A-15JIN	Alliance Memory Inc	23+	SOJ-36	AS7C4096A Series 4-Mbit (512 K x 8) 5 V 15 ns CMOS Static RAM - SOJ-36
US-625AXTLQE	ASAHI KEIKI	2023+	weld	Temperature sensor
V23154D735B110	TE	2023+	Relays	Low Signal Relay - PCB V23154D 735B110
V23154D735F104	TE	23+	Relays	Signal Relays, 250 VDC Contact Voltage, 250 VAC Contact Voltage, 806 mW Coil Power (DC), Printed Circuit Board, PCB-THT, Axicom Cradle Relay N
AZ16-12ZIBI-1747-M20	SCHMERSAL	2023+	switch	Safety gate switch
PW70d(2x10432Ω/83°）	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
PW70d	FSG	2023+	potentiometer	PW70D(2*1043Ω 1%/83°）（1700Z04-257.106)
S34ML16G202BHI000	Flip Electronics	2051+	63BGA	16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F	ITTVEAM	2023+	connector	Connectors, Circular Connectors, Circular Plugs & Receptacles
HRF-AT4521-FL-TR	Honeywell	10+11+	SMD	RF ATTENUATOR 50OHM 16VQFN
CL1215-02P72ET-U2	Schaltbau	2023+	Contactors	CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2	Schaltbau	2023+	Contactors	1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
D-U204N-KLCQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
MIP30F00830-S1048	Amphenol Positronic	2023+	connector	MIP series connectors
C163C/110EV-R1	Schaltebao	2023+	Contactors	Contactors
F670-H4V-XUU	LEACH	2023+	Relays	F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU	LEACH	2023+	Relays	F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20	SCHMERSAL	2023+	switch	Safety switches

TI brand product recommendation

Model	Manufacturers	lot number	encapsulation	illustrate
THS3062	TI	09+	8MSOP-PowerPAD, 8SO PowerPAD, 8SOIC	High voltage, high slew rate current feedback amplifier
THS3061	TI	09+	8MSOP-PowerPAD, 8SOIC	High voltage, high slew rate current feedback amplifier
THS3001	TI	10+	8MSOP-PowerPAD, 8SOIC	420MHz current feedback amplifier
OPA695	TI	09+	6SOT-23, 8MSOP, 8SOIC	Ultra-wideband current feedback op amp with disable function
OPA694	TI	10+	5SOT-23, 8SOIC	Wideband, low power, current feedback amplifier
OPA691	TI	07+	6SOT-23, 8SOIC	Wideband current feedback op amp with disable function
OPA684	TI	07+	6SOT-23, 8SOIC	Low power current feedback op amp with disable function
OPA683	TI	11+	6SOT-23, 8SOIC	Very low power current feedback amplifier with disable function
OPA4684M	TI	10+	14CDIP SB	Military quad low-power current feedback operational amplifiers
OPA4684	TI	09+	14SOIC, 14TSSOP	Four low-power current feedback op amps
OPA3695	TI	10+	16SSOP/QSOP	Ultra-wideband current feedback op amp with disable function
OPA3691	TI	10+	16SOIC, 16SSOP/QSOP	Three wideband current feedback op amps with disable function
OPA3684	TI	09+	14SOIC, 16SSOP/QSOP	Low power triple current feedback op amp with disable function
OPA2695	TI	10+	16QFN, 8SOIC16QFN, 8SOIC	Ultra-wideband current feedback op amp with disable function
OPA2694	TI	08+	8SOIC	Two, wideband, low-power current feedback op amps
TPS61072	TI	1016+	SOT23-6	The adjustable, 600 mA switch, 90% efficiency PFM/PWM is used in a ThinSOT-23 boost converter
OPA2691	TI	07+	14SOIC, 8SOIC	Dual wideband current feedback op amps with disable function
OPA2683	TI	09+	10MSOP, 8SOIC, 8SOT-23	Very low power dual current feedback op amps
TPS61071	TI	10+	SOT23-6	Adjustable 600mA switching 90% efficiency PWM boost converter
OPA2677	TI	10+	16VQFN, 8HSOP, 8SO PowerPAD, 8SOIC	SpeedPlus(TM) Dual, wideband, high output current operational amplifier