home page>Product Center> Voltage feedback

Product images are for illustrative purposes only
Product details are welcome upon request

THS4032-EP

Category:Voltage feedback
Product Name:100MHz low noise high speed amplifier
Manufacturers:TI
Production Batch Number:10+
Encapsulation:8MSOP-PowerPAD
Stock Status:There is stock
Stock Quantity:5000
Minimum order quantity: 1
Details:

Product introduction

The THS4031 and THS4032 are ultra-low voltage noise, high speed voltage feedback amplifiers ideal for applications requiring low voltage noise, including communications and imaging. Single and Dual Amplifier THS4031 The THS4032 offers very good ac performance over 100 - MHz bandwidth (grams = 2), 100-V/μs slew rate, and 60 nanosecond settling time (0.1%). The THS4031 and THS4032 are unity-gain and 275-MHz bandwidth stable. The 90 mA drive capability of these amplifiers attracts as high as 8.5 mA of current per channel. Nevada with total harmonic distortion (THD) of -90 dBc at f = 1 MHz and 1.6 very low noise Nevada/ HzThe THS4031 and THS4032 are ideal for converters, buffering, analog-to-digital applications, which require low distortion and low noise, for example.

characteristic

Ultra Low 1.6 Nevada/ HzVoltage noise
High speed:
- 100 MHz bandwidth [g = 2 (-1), -3 dB]
- 100-V/μs slew rate
Very low distortion
- = -72 dBc total harmonic distortion (frequency 1 MHz, studyed_{L for}150 ）
- Total harmonic distortion = -90 dBc (frequency of 1 MHz, study_{L for}1 thousand ）
Low 0.5 millivolts (typical) input offset voltage
90 mA output current drive (typical)
± typical operation from 5 V to ± 15 V
In standard SOIC and MSOP will be PowerPAD™, BuildHome, or FK packages
Evaluation modules are available
Supports defense, aerospace and medical applications
- Control baselines
- A package/test website
- A production website
- Can be used in the military (-55°C/125°C) temperature range^（1）
- Extend product life cycle
- Extend the product, change notifications
- Product traceability

parameter

	THS4032 - endorphins
IQ per channel (max.) (mA)	11
GBW (typical) (MHz)	100
Ganymede (typical) (mAh)	90
and (min) (v)	10
and (maximum) (v)	30
Number of channels	2
Pins/Packets	8MSOP - PowerPAD
ACL, the minimum stable gain (V/V).	One
ACL (MHz) of weight @	100
Differential Gain(%)	0.015
Phase error (degrees)	0.025
Violet (maximum) (millivolts)	2
Maximum offset voltage drift (+/-)((UV/Celsius)	10
Available channels	Seconds, D
Explosion protection (max.) (North America)	8000
Noninverting Input Current Noise (Yearly/rtHz)	1.2
Second harmonic (DBC).	55
Third harmonic (DBC).	62
@兆赫	5
Weight @ g = 2 (MHz)	100
Crosstalk (-dB).	63
Operating temperature range(°C)	-55 to 125

andTHS4032-EPRelated ICs are:

Model	Manufacturers	lot number	encapsulation	illustrate
MX25U4032E	MXIC	18+	150mil 8-SOP 150mil 8-VSOP h:0.9mm	memorizer
MAX4032	MAXIM	12+	SC70	5V, 6dB video buffer
E01. F95-4032G0/220001	ELECTRON	10+11+		Hong Kong spot, imported original
BQ24032ARHLT	TI	10+11+		Hong Kong spot, imported original
LC4032V-75T44C	LATTICE	04+	QFP-44	Original
K7B403225B-QC75	Samsung	05+	QFP	Brand new original
LC4032V-75-10I	Lattice	04+	TQFP48	Original stock
STK4032MK2	Sanyo	02+	Thick film circuit	Original / Joint Venture
LC4032V-75T44	LATTICE	Up-to-date updates	N／A	Brand new original
ST24032	ST	0221+	DIP8	Brand new original
K7A403200B-QI14	Samsung	08+	QFP-100	Original
LC4032C-75T44C	LATTICE	N／A	N／A	N／A
THS4032ID	TI	N／A	N／A	High speed, low noise operational amplifier
CU4032K75G2	N／A	03+	N／A	Brand new original
SMA4032	SanKen	02+	SIP	Brand new original
MJ4032	ST	99+	TO-3	Brand new inventory
PT403275M	YCL	9819+	N／A	N／A
LC4032V75TN44-10I	Lattice	05+	TQFP	Brand new original
PT403275	YCL	9819	N／A	N／A
MVT904032/CX/DP1S	CARLINK	02+	DIP	Brand new original

Popular searches

Model	Manufacturers	lot number	encapsulation	illustrate
S34ML16G202BHI000	Flip Electronics	2051+	63BGA	16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F	ITTVEAM	2023+	connector	Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2	Schaltbau	2023+	Contactors	CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2	Schaltbau	2023+	Contactors	1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
D-U204N-KLCQ	Mors Smitt	2023+	Relays	No magnetic arc blow-out
MIP30F00830-S1048	Amphenol Positronic	2023+	connector	MIP series connectors
C163C/110EV-R1	Schaltebao	2023+	Contactors	Contactors
F670-H4V-XUU	LEACH	2023+	Relays	F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU	LEACH	2023+	Relays	F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20	SCHMERSAL	2023+	switch	Safety switches
RX2025GE1	Surio	2023+	connector	Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24	Surio	2023+	connector	Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMPSE06T36M2SV0N	AB Connectors	2023+	connector	Plug with RFI Ground
ABMP18T28M13SV0N	AB Connectors	2023+	connector	RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0	AB Connectors	2023+	connector	Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D	samtec	2023+	connector	Classic PCB Header Strips, 0.100" pitch
TNL22ERT-62	ABB	2016+	Contactors	4P St Contactor Relay 77-143Vdc \|Abb TNL22ERT-62
62EM1-00001	Microchip	2023+	Development board	AgileSwitch® 62mm Electrical Master SiC Gate Driver Board

TI brand product recommendation

Model	Manufacturers	lot number	encapsulation	illustrate
THS4032	TI	09+	Dual 100MHz low noise voltage feedback amplifiers	8MSOP-PowerPAD, 8SOIC
THS4031M	TI	10+	8MSOP-PowerPAD, 8SOIC	100MHz low noise voltage feedback amplifier
THS4022	TI	11+	8MSOP-PowerPAD, 8SOIC	Dual 350MHz low noise voltage feedback amplifiers
THS4021	TI	10+	8MSOP-PowerPAD, 8SOIC	350MHz ultra-low noise voltage feedback amplifier
THS4012	TI	09+	8MSOP-PowerPAD, 8SOIC	290MHz dual low distortion voltage feedback amplifiers
THS4011M	TI	10+	20LCCC, 8CDIP	290MHz low distortion voltage feedback amplifier
THS4011	TI	10+	8MSOP-PowerPAD, 8SOIC	290MHz low distortion voltage feedback amplifier
THS4001	TI	10+	8SOIC	270MHz voltage feedback amplifier
SN10503	TI	09+	14HTSSOP, 14SOIC	Low distortion high speed rail-to-rail output operational amplifier
SN10502	TI	09+	8MSOP, 8MSOP-PowerPAD, 8SOIC	Low distortion high speed rail-to-rail output operational amplifier
SN10501	TI	09+	5SOT-23, 8MSOP, 8MSOP-PowerPAD, 8SOIC	Low distortion high speed rail-to-rail output operational amplifier
OPA890	TI	10+	6SOT-23, 8SOIC	Low power, wideband voltage feedback op amp watts/disabled
OPA847	TI	09+	6SOT-23, 8SOIC	Wideband ultra-low noise voltage feedback operational amplifier with shutdown state
OPA846	TI	09+	5SOT-23, 8SOIC	OPA846: Wideband low noise voltage feedback operational amplifier
OPA843	TI	09+	5SOT-23, 8SOIC	Wideband, low distortion, medium gain voltage feedback operational amplifier
OPA830	TI	10+	5SOT-23, 8SOIC	OPA830: Low power single-supply operational amplifier
OPA820	TI	10+	5SOT-23, 8SOIC	Unity-gain stabilized, low noise voltage feedback op amp
OPA699M	TI	10+	8CDIP SB	Gain +4 stabilized wideband voltage limiting amplifier
OPA699	TI	10+	8SOIC	OPA699: Wideband High Gain Voltage Limiting Amplifier
OPA698M	TI	10+	8CDIP SB	Unity-gain stable wideband voltage limiting amplifier