TLC27L4B

The TLV276x single-supply op amp provides a bandwidth of only 20 μA at 500 kHz and operates over an industrial temperature range of 1.8 V. The recommended maximum supply voltage is 3.6 volts, which allows the device to operate (± 1.8 V supply as low as ± 0.9 V) with two AA or AAA batteries. These devices are characterized at 1.8 V (author: 2 AA (a) cell end-of-life) and 2.4 V (rated voltage of 2NiC/NiMH batteries). The TLV276x has rail-to-rail input and output capability at 1.8, which is a requirement of five

The low supply current combined with very low input bias current allows them to be used with megohm-ohm-resistors. The low standby current of only 10 nA makes these devices ideal for low-frequency measurements and applications that desire long active battery life.

• Low supply voltage... 1.8 V to 3.6 V
• Very low supply current... 20 μA (per channel)
• Ultra-low-power shutdown mode
  • I_{Deputy Administrator (SHDN's) =}10 sodium/channel
• CMOS rail-to-rail input/output
• Input common-mode voltage range...- 0.2 V_reachV DD+ is 0.2 V
• Input offset voltage 550μV...
• Broadband... 500 kHz
• Slew rate... 0.20 V/μs
• Specified temperature range
  • 0°C to 70°C commercial grade:
  • -40°C to 85°C industrial grade:
• Ultra-small package
  • 5 or 6-pin SOT - 23 (TLV2760/1)
  • 8 or 10-pin MSOP (TLV2762/3)
• EVM for general-purpose operational amplifiers