The high-performance, internally compensated op amps of the TLE214x and TLE214xA devices are built using Texas Instruments' complementary bipolar flattening process.TLE214xA is a tight offset voltage class of TLE214x.Both are pin-compatible's upgraded to industry standards.
An input stage was designed while achieving a low-noise audio-band 1050 Vidic /
The 100-pF load is useful / actuator / positioning fast driver.Under similar test conditions, the settling time of 0.01% is 400 ns".
The device has a stable and capacitive load of up to 10, although the bandwidth of 6-MHz nF is reduced to 180 MHz at this high load level.Similarly, the TLE214x is useful, TLE214xA low-droop sample-and-holds, and directly buffered, long cables, including 4-mA 20-mA current coils.
The view in the "Datasheet" is fully described
characteristic
- Low noise
-
10 Hz 15 Vidic / ...
Hertz\
-
10.5 Vidic / 1,000...Hertz\
- 10000-pF load capacity
- 20-mA minimum short-circuit current output
- 27-V/μs rate minimum kill
- High 5.9 MHz gain product...
- μV low VIO... Max at 25°500 C
- Single or split supply... 4 V to 44 V
- Fast settling time
- 340 ns down to 0.1%
- 0.01% to 400 ns
- 150 ns to restore saturation ...
- large output swing,
- (v) - + 0.1 VCC VCC + - 1 is V