illustrate

The TPA2018D1 is a single, filterless Class D audio power amplifier with Class D volume control, dynamic range compression (DRC) and automatic gain control (AGC). It is available in 1.63 mm × 1.63 mm WCSP packages.

The DRC/Auto Gain Control function is TPA2018D1 via a programmable digital I2C interface. The DRC/AGC function can be configured to automatically prevent distortion and reinforcement of the audio signal, which is usually not heard of on the calm channel. DRC/Automatic Gain Control, which can also be configured to protect the dynamic range of damaged speakers and compressed music at high power levels to match the dynamic range of the speakers. Gain can be selected from -28 dB to +30 dB in 1-dB steps. The driving TPA2018D1 is at 5 V at 3 watts 4 At load or 880 3 megawatts.

characteristic

• Filterless Class D architecture
• 3 W at 4 at 5 V (10% THD+N).
• 880 mW to 8 at 3.6 volts (10% THD+N).
• Supply voltage range: 2.5 V to 5.5 V
• Flexible operation with/without I 2 C
• DRC programmable/automatic gain control parameters
• Digital I 2 C volume control
• Selectable gain from -28 dB to 30 dB in 1 dB steps (used when compressed)
• Selectable attack, release and hold time
• 4 compression ratios are available
• Low supply current: 1.8 mA;
• Low shutdown current: 0.2 microamperes
• High power supply rejection ratio: 80 dB
• Fast boot time: 5 ms
• Automatic gain control on/off function
• Enable/disable features only
• Short circuit and thermal protection
• Space-saving package
  • 1,63 mm × 1,63 mm Nanometer Free WCSP Package (YZF)