TPA2032D1

illustrate

The TPA2032D1 (2V/V gain), TPA2033D1 (3V/V gain), and TPA2034D1 (4V/V gain) are 2.75-W high efficiency filterless Class D audio power amplifiers, each approximately 1.5 mm × 1.5 mm wafer-scale package (WCSP), requiring only one external component. This pin is the same as TPA2010D1, except for the external gain setting of the input resistance required for TPA2010D1, which is divided into fixed gain TPA203xD1 families, and is the same as the TPA203xD1 family.

Features such as -75dB PSRR and a very small PCB package (WCSP package amplifier plus single decoupling capacitor) improve RF rectification immunity ideal for the TPA203xD1 family on wireless handheld devices. The fast start-up time of 3.2 ms with minimal popularity makes the TPA203xD1 family ideal for PDA applications.

characteristic

• Maximize battery life and reduce thermal energy
  • 0.5 - μ shutdown current
  • Quiescent current of 3.0 mA
  • High efficiency Class D
    • 88%, to 400 mW8
    • 80% at 100mW at 8
• Three fixed-gain versions
  • TPA2032D1 has a yield of 2 v/V (6dB).
  • The TPA2033D1 has a gain of 3 volts per five (9.5dB)
  • TPA2034D1 is a v/V (12dB) gain of 4
• Only one external component is required
  • The internally matched input gain and feedback resistors are excellent for PSRR and CMRR
  • Optimized PWM output stage eliminates the need for LC output filters
  • The PSRR (-75 dB) and wide supply voltage (2.5 V to 5.5 V) eliminate the need for dedicated voltage regulators
  • The fully differential design reduces RF rectification and eliminates bypass capacitance
  • The common-mode rejection ratio (-69 dB) eliminates the two input coupling capacitors
• Thermal and short-circuit protection
• The pinout is very similar to TPA2010D1
• Wafer chip scale packaging (WCSP packaging)
  • NanoFree is lead-free (lead-free: YZF)