TPA3007D1

illustrate

The TPA3007D1 is a 6.5 W mono bridged load (BTL) class Daudio high-efficiency amplifier, eliminating the need for heatsinks. The TPA3007D1 can drive 8 -Only one ferrite bead filter horn requires reduced electromagnetic interference.

The amplifier's gain control is controlled by two inputs, GAIN1 and GAIN0. This makes the amplifier 12 years, 18 gain, 23.6, 36 dB and configuration. The differential input stage provides high common-mode rejection and improved power rejection.

The amplifier also includes a "non-pop" circuit to reduce the registered electric prevalence and amount off when cycling.

The TPA3007D1 is available in a 24-pin TSSOP package (Wednesday) and does not require an external heatsink.

characteristic

• 6.5 at 8 W -Tov Consumer Council, short to ground, short circuit between outputs)
• Third-generation modulation technology:
  • The legislation replaces large and small, low-cost ferrite bead filter filters in most applications
  • Increase efficiency
  • Improved signal-to-noise ratio
• Low supply current... mA is typically at 12 volts
• Shutdown control...
• apply
  • LCD monitor/TV
  • Laptops replace desktops
  • Hands-free car kits
  • Active speakers