Model |
Manufacturers |
lot number |
encapsulation |
illustrate |
TPS54972pwp |
TI/BB |
10+ |
HTSSOP28 |
9A Active Bus Termination/DDR Memory DC/DC Converter |
sn74AHCT125pwr |
TI/BB |
10+ |
TSSOP-14 |
Quad bus buffer gate with three-state output |
MSP430F2122IPWR |
TI/BB |
10+ |
TSSOP28 |
16-bit ultra-low-power microcontroller with 4kB flash, 512B RAM, 10-bit ADC, and USCI |
TPS5410DRG4 |
TI/BB |
10+ |
SOP-8 |
2A wide input range step-down Swift(TM) converter |
BQ24035RHLRG4 |
TI/BB |
1014+ |
QFN-20 |
Charger with dynamic power path management, 6V output cut-off, and 4.2V battery regulation |
BQ24400PWRG4 |
TI/BB |
2009 |
TSSOP-8 |
Programmable NiCd/NiMH fast charge management device |
BQ24702PWRG4 |
TI/BB |
10+ |
TSSOP-24 |
Multi-compound battery charge controller and system power selector |
BQ29400PWRG4 |
TI/BB |
08+ |
TSSOP-8 |
Level 2 overvoltage protection for 2, 3 or 4 Li-Ion and Li-Polymer batteries (Level 2 protection) |
BQ29401PWR |
TI/BB |
09+ |
TSSOP8 |
Voltage protection for 2, 3 or 4 lithium batteries (Level 2 protection) |
BQ24105RHLRG4 |
TI/BB |
10+ |
QFN-20 |
bqSWITCHER(TM) synchronous switch-mode Li-ion charger with 2A FET in QFN package, 1-cell to 3-cell standalone versions |
BQ26150DCKRG4 |
TI/BB |
TI/BB |
SOT23-5 |
Battery pack safety certified IC for portable applications (bqSECURE) |
BQ29411PWRG4 |
TI/BB |
11+ |
TSSOP-8 |
Secondary Overvoltage Protection for 2-4 Series Li-Ion/Li-Polymer Batteries (4.40V) |
BQ24081DRCTG4 |
TI/BB |
08+ |
QFN10 |
Single-cell Li-Ion charger with 1A FET, timer enabler, and temperature sensing |
BQ24031RHLRG4 |
TI/BB |
2010+ |
QFN20 |
Single-Chip Charge and System Power-Path Management IC (bqTINY-III) |
BQ29419PWR |
TI/BB |
09+ |
TSSOP8 |
For voltage protection of 2, 3 or 4 cell lithium-ion batteries |
BQ24083DRCTG4 |
TI/BB |
2008+ |
QFN-10 |
Single-cell Li-Ion charger with 4.06V charging voltage |
BQ24074RGTRG4 |
TI/BB |
2010+ |
QFN16 |
USB-powered Li-ion battery charger and power path management IC, 10.5V OVP |
BQ24075RGTRG4 |
TI/BB |
2010+ |
QFN-16 |
USB-powered Li-ion battery charger and power path management IC with 5.5V output voltage |
BQ24230RGTRG4 |
TI/BB |
10+ |
QFN16 |
USB powered 0.5A Li-Ion charger with dynamic power management, 6.6V OVP |
BQ24031RHLRG4 |
TI/BB |
2010+ |
QFN20 |
Automotive lithium-ion chargers with dynamic power channel management and output regulation are dual-input lithium-ion chargers |