TPIC46L01

illustrate

The TPIC46L01, TPIC46L02 and TPIC46L03 are low-end pre-drivers that provide serial interfaces and parallel input inputs to control the power of six external field-effect transistors (FETs), such as the power switches available in Texas Instruments' TPIC array series. These devices are primarily used in applications with inductive loads such as low-frequency switches, solenoid valves, and relays. Each channel fault state provides a serial data format. Each drive channel has independent shutdown state open-load detection and status shorted-load/short-to-battery detection. Battery overvoltage, undervoltage detection and shutdown are provided. Battery and output load failures provide real-time fault reporting to the controller.

characteristic

• 6-channel Serial-In/Parallel-In low-end pre-FET drivers
• The equipment can be cascaded
• Built-in 55 - V inductive load V GS protection clamp and clamp external power FETs
• Independent Shorted-Load/Short-to-Battery fault detection of all drainage stations
• Independent shut-off open-load fault detection
• In battery voltage latching protection and fault reporting
• Lock protection according to battery voltage TPIC46L01 and TPIC46L02
• Asynchronous drain open circuit fault flag
• The output of the device can be wired with multiple external devices or operations
• The state returned by the fault is through the serial output terminal
• Global internal power-on reset device
• Hysteresis high impedance CMOS compatible inputs
• The load fails when the output of the TPIC46L01 and TPIC46L03 disables gate short-circuit
• When the gate output is in PWM mode with a low duty cycle, a short circuit, load failure occurs, TPIC46L02 conversion