TPS2833

• Product Introduction

TPS2834 and TPS2835 are synchronous step-down powerstage MOSFET drivers. These devices are ideal for designing high-performance power supplies with switching controllers that do not include on-chip MOSFET drivers. The driver is designed to provide peak current to a large capacitive load of at least 2 people. High-side drives can be configured as ground reference or floating guide. The adaptive dead-time control circuitry eliminates the current during conversion through the main power FET switch and provides a high-efficiency step-down regulator. TPS2834 and TPS2835 have additional control functions: enable, synchronized, crowbar. The two high-side and low-side drivers are enabled to low when turned off.

characteristic

• Floating bootstrap or ground reference high-side drives
• Adaptive dead zone time control
• The maximum rise/fall time of 50 ns is 3.3 - NF load
• 2.4 Typical output current
• 4.5 - V to 15 V supply voltage range
• TTL-compatible inputs
• Built-in bootstrap diode Schottky
• Control synchronous or synchronous asynchronous operations
• It is an overvoltage protection crowbar to protect against breakage high-side power FETs
• Low supply current typical.... 3 mAh
• Suitable for high current single or multiphase power supplies
• -40°C to 125°C operating junction temperature range virtual
• It can be used to package PowerPADs for SOIC and TSSOP