• Product Introduction

TPS40007DGQ Low input (2.25V-5.5V) 300kHz frequency synchronous buck controller with output drive/suck current and bias operation

illustrate   The TPS4000x is a low-voltage, non-isolated synchronous buck regulator controller. These controllers drive an N-channel MOSFET with a primary buck switch and an N-channel MOSFET with a synchronous rectifier switch, enabling very efficient power conversion. In addition, the device controls the main switch to turn off the delay rectifier conduction and the water to the rectifier to turn on the main switch in this line of thinking to reduce diode losses with TI's synchronous rectifier (including conduction and recovery) proprietary predictive gate drive ™ technology. These losses are significantly reduced, increasing efficiency. For a given converter power stage, smaller FETs, or heat sinks, can be used to reduce or even eliminate them.   characteristic   The operating input voltage is 2.25 V to 5.5 V The output voltage is 0.7 low V 1%, with a built-in 0.7 V reference The gate drives ™the N-channel MOSFET driver with higher efficiency Externally adjustable soft-start and overcurrent limiting Fixed frequency voltage mode control TPS40007,300 kHz TPS40009,600 kHz Source/sink pre-bias output with V The 10-pin MSOP packages the PowerPAD™ for higher performance Thermal shutdown Internal bootstrap diode apply Network equipment Telecommunications equipment base station server DSP power supply Power modules