TPS40041DRBR

illustrate

TPS40040 and TPS40041 DC-to-DC controllers are designed for input sources from 2.25 V to 5.5 V. To reduce the number of external components, some operating parameters are fixed internal, which is, frequency, soft start time, and the level of short circuit protection (SCP). For example, TPS40040/1 operates at 300 kHz/600 respectively.

Three short-circuit threshold levels, one of which can be optionally increased by the COMP pin from the outside to the circuit ground resistance. On the power supply, when the output voltage rises with the previous internal soft-start command, TPS40040/1 enters the calibration cycle, measuring the COMP pin current output and selecting a threshold voltage for an internal SCP.

characteristic

• 2.25 - V to 5.5 V input
• Output voltage from 0.6 V to 90% of VIN
• High-side drive N-channel FETs
• Pre-biased outputs are supported
• Adaptive anti-cross conduction door lanes
• 1%, 0.6 - V reference
• Two fixed switching frequency versions, TPS40040 (300 kHz) and TPS40041 (600 kHz)
• Three selectable short-circuit protection levels of 105 mV, 180 mV, and 310 mV
• Hiccup reboot failure
• Voltage mode control
• Low level enabled
• Thermal shutdown protection at 145°C
• 8-pin 3 mm × 3 mm ground connection to the SON of the heatsink
• apply
  • Point of load
  • telecommunication
  • DC to DC modules
  • Stb