TPS40193DRCR

illustrate

TPS40192 and TPS40193 are cost-optimized synchronous buck controllers that operate from 4.5 V to 18 V inputs. These controllers are based on a voltage-mode control architecture with a fixed switching frequency of either 600 kilohertz (TPS40192) or 300 kilohertz (TPS40193). The higher switching frequency promotes smaller inductors and output capacitors, providing a compact power solution. An adaptive anti-cross conduction scheme is used to prevent shooting through current in the power FET.

Short-circuit detection is the same as when the voltage drop of the opposite low-side MOSFET is detected, and the threshold for users to choose it is 100 mV, 200 mV or 280 mV. The threshold is set by a single external connection to the ground resistor from the match.

characteristic

• Input operating voltage range: 4.5 V to 18 V
• Up to 20 - A output current
• Pre-biased outputs are supported
• 0.5%, 591 mV reference
• 600 kilohertz (TPS40192) and 300 kilohertz (TPS40193) switching frequencies
• Three selectable levels of thermally compensated short-circuit protection
• Hiccup reboot failure
• Internal 5-V regulator
• R DS(ON) current sensing for high-side and low-side FETs
• 10-pin 3 mm × 3 mm SON package
• Built-in 4 ms soft boot time
• Thermal shutdown protection at 145°C
• apply
  • Cable Modem's client device
  • Digital set-top box
  • Graphics/sound cards
  • Entry-level and mid-range servers