Model |
Manufacturers |
lot number |
encapsulation |
illustrate |
TPS40210-HT |
TI |
10+ |
MSOP-10 |
High temperature wide input range current mode boost controller |
TPS40210 |
TI |
2010+ |
MSOP-10 |
Wide input range current mode boost controller |
OPA340 |
TI |
10+ |
5SOT-23, 8PDIP, 8SOIC |
MicroAmplifier(TM) family of single rail-to-rail operational amplifiers |
TPS40200-Q1 |
TI |
10+ |
8SOIC |
Automotive wide input range non-synchronous voltage mode controller |
TPS40200-HT |
TI |
10+ |
SOP-8 |
High temperature wide input nonsynchronous step-down DC/DC controller |
TPS40200-EP |
TI |
10+ |
8SOIC |
Enhanced wide input range non-synchronous voltage mode controller |
OPA340-EP |
TI |
10+ |
5SOT-23 |
MicroAmplifier™ family of single rail-to-rail operational amplifiers |
TPS40197 |
TI |
11+ |
QFN-16 |
4.5V to 14V input synchronous buck controller with 4-bit VID interface and power good indication |
TPS40195 |
TI |
11+ |
TSSOP16 |
The 4.5V to 20V synchronous and power synchronous buck controllers have good results |
OPA363 |
TI |
10+ |
6SOT-23, 8SOIC |
1.8V, high CMR, RRIO op amp with off-state |
TPS40192 |
TI |
09+ |
QFN10 |
4.5V to 18V input, low pin count synchronous buck controller with power good indication |
TPS40180 |
TI |
09+ |
QFN-24 |
Single-phase stackable controller |
TPS40170 |
TI |
1126+ |
20VQFN |
Wide 4.5V to 60V input synchronous PWM buck controller |
TPS40140 |
TI |
07+ |
QFN 36 |
Dual or dual-phase stackable controller |
OPA364 |
TI |
10+ |
5SOT-23, 8SOIC |
1.8V, high CMR, RRIO op amp |
OPA365-Q1 |
TI |
10+ |
5SOT-23 |
Automotive 2.2V, 50MHz low noise single rail-to-rail operational amplifier |
OPA37 |
TI |
10+ |
8PDIP, 8SOIC |
Ultra-low noise precision operational amplifiers |
OPA376-Q1 |
TI |
10+ |
5SOT-23 |
Automotive low noise, low IQ precision operational amplifiers |
OPA381 |
TI |
10+ |
8MSOP, 8SON |
Accurate, low-power, high-speed transimpedance amplifier |
TPS40131 |
TI |
10+ |
QFN-32 |
Two-phase synchronous buck controller with integrated FET driver |