TPS54060

illustrate

The TPS54060 device is a 60V, 0.5A, downstage regulator with integrated high-side MOSFETs. Current mode control provides easy external compensation and flexible component selection. A low-ripple pulse skip pattern reduces no-load and regulates the output supply current to 116μA. Using the Enable pin, the shutdown current is reduced to 1.3μA when the enable pin is low.

The undervoltage lockout is internally set to 2.5V, but the enable pin can be increased. The output voltage start ramp controls the slow start pin and can also be used for sort/track configurations. The open-drain supply has a good output signal, indicating a rated voltage of 93% to 107%.

The wide switching frequency range allows for optimized efficiency and external component size.

View the full descriptive datasheet

characteristic

• 3.5V to 60V input voltage range
• 200 meters High-side MOSFETs
• High efficiency with pulse hopping ecological mode in light load ™
• 116μA quiescent current operation
• 1.3μA shutdown current
• Switching frequency from 100kHz to 2.5MHz
• to external clock synchronization
• Adjustable slow start/sequencing
• UV and OV power supply outputs well
• UVLO voltage and adjustable hysteresis
• 0.8 - V internal voltage reference
• The use of the MSOP10 and 3mm × 3mm encapsulates the PowerPAD™SON
• Supported SwitcherPro™ software tools
  apply
• • 12 volt, 24-V and 48 V industrial and commercial low-energy systems
  • Aftermarket auto parts: video, GPS, entertainment