TPS54372-Q1

illustrate

Thanks to SWIFT's ™ DC/DC regulator family, TPS54372 low input voltage high output current synchronous step-down PWM converter integrates all the required active ingredients. Included in the listed features with the substrate is a true, high-performance, voltage-error amplifier capable of selecting output filtered inductor and capacitor components in transient conditions and maximum flexibility; a secondary voltage latching circuit to prevent start-up until the input voltage reaches 3 volts; A slow start circuit is set up internally and externally to limit the inrush current and the output state indicates effective operating conditions.

The TPS54372 is to encapsulate the PowerPAD™ in a thermally enhanced 20-pin TSSOP (Public Works), eliminating bulky heat sinks.

characteristic

• Qualified automotive applications
• The track is plus a reference voltage
• 60 meters The high efficiency of MOSFET switches is achieved over 3 continuous output or sink current sources
• 6% to 90% V I output tracking range
• Wide PWM Frequency:
  Fixed 350 kHz or 280 kHz to 700 adjustable kHz
• Protect the load by peak current limiting and thermal shutdown
• Comprehensive solutions reduce board area and total cost
• apply
  • DDR memory terminal voltage
  • Active termination of natural gas to oil and SSTL high-speed logic families
  • The DAC's current output stage is highly controlled
  • Precision point-of-load power supply