illustrate

Thanks to SWIFT's ™ DC/DC regulator family members, TPS54673 low input voltage high output current synchronous step-down PWM converters integrate all the required active ingredients. Included in the listed features with the substrate is a true, high-performance, voltage-error amplifier capable of selecting output filtered inductors and capacitors for maximum performance and flexibility; a secondary voltage latching circuit to prevent start-up until the input voltage reaches 3 volts; An internal or external setup of slow start circuitry to limit inrush current, and a power supply good output processor/logic reset is useful, fault signal and power supply sequencing.

Applied to reliable pre-charge output power, TPS54673 is designed only at the start-up current source.

characteristic

• 30 -The high efficiency of the MOSFET switch at 12 peaks is 6-A continuous output current source or sink
• During the activation of the inhalation current for the disabled
• Adjustable output voltage range from 0.9 - V to 3.3 V with 1.0% accuracy
• Wide PWM Frequency:
  Fixed 350 kHz, 550 kHz or 280 kHz to 700 adjustable kHz
• Synchronized to 700 kHz
• Protect the load by peak current limiting and thermal shutdown
• Comprehensive solutions reduce board area and component count
• apply
  • Low-voltage, high-density distributed power system
  • High-performance DSP, FPGA, ASIC, and microprocessor regulations for the point of load
  • broadband, optical communication networks and infrastructure
  • Power PC Series processors