TPS60130

illustrate

The TPS6013x boost-regulated charge pump generates an output voltage of 5 ± 4% from 2.7 to V to 5 V to an input voltage of 5.4 V (three alkaline, NiCm, NiMH or one or lithium or lithium batteries). The TPS60130/TPS60131 with an output current of 300 mA and the TPS60132 with an output current of 150/TPS60133 input all mA from 3 V. Only four external capacitors are required to establish a complete high efficiency DC/DC charge pump converter. To achieve high efficiency over a wide input voltage range, the charge pump automatically selects a conversion mode between 1.5x or multiplex. From a 3 V input, all chips can start with full load current.

These devices feature power-saving pulse-skipping modes at light loads, extending battery life. The TPS60130 and TPS60132 include a low battery comparison, and the TPS60131 and TPS60133 features a power good output.

Device usage

• Battery-powered applications
• Three battery-to-5 V conversions or point-of-point uses for 3.3 V to 5 V conversions
• Lithium battery to 5 V conversion
• Portable instrument
• Battery-powered microprocessor system
• Backup battery boost converter
• PDA, organizer, laptop
• Handheld instruments
• Medical devices (e.g. blood glucose meters)
• PCMCIA and 5-V smart card supply

  PowerPAD is a trademark of Texas Instruments.

characteristic

• Up to 90 2.7 - V efficiency of 5.4 - V input voltage range due to special switching topologies
• Up to 300 mA output current (TPS60130 and TPS60131)
• No inductance, low EMI
• Regulated 5V ± 4% output
• There are only four required external components
• Quiescent current of 60 uA
• 0.05 - uA shutdown current
• The shutdown load is disconnected
• The space-saving, thermally enhanced package will be PowerPAD^trademark
• Evaluation module available (TPS60130EVM-143)