TPS60204

illustrate

The TPS6020x boost, regulated charge pump generates an input voltage of 3.6 V from 1.8 V to 3.3 V to ± 4% of the output voltage. These devices are typically operated by two alkaline batteries, NiCd, NiMH and a minimum supply voltage of 2 V input and a minimum of 100 mA for continuous output current. Only four external capacitors are required to build a complete low ripple DC/DC converter. The push-pull's two single-ended charge pump modes of operation guarantee low output voltage ripple as it is constantly shifting to the output.

These devices operate in the newly developed LinSkip mode. In this mode of operation, the device switches seamlessly from the savings pulse-skipping mode at a light load, low-noise constant frequency, and the linearly regulated mode once the output current exceeds the LinSkip minimum power of approximately 7 mA.

characteristic

• The regulated 3.3 V output voltage is up to 100 mA output 1.8 V to a 3.6 - V input voltage
• Less than 5 millivolts_{(Polypropylene)}Output voltage ripple enables a push-pull topology
• Integrated low battery and power good detector
• The switching frequency can be synchronized to an external clock signal
• Extends quiescent current battery usage with up to 90% efficiency and 35 uA
• Easy to design, low cost, low EMI power supply because no inductors are used
• 0.05 - microamp standby current, battery detached out of shutdown mode load
• The converter solution in an ultra-compact 10-pin MSOP package has only four external capacitors required
• Evaluation module available (TPS60200EVM-145)
• apply
  • Replaces DC/battery-powered applications such as inductive DC converters:
    • The two batteries are converted at 3.3-V
    • MP3 portable audio player
    • Battery-powered microprocessor system
    • Backup battery boost converter
    • PDA, organizer and cordless phone
    • Handheld instruments
    • Medical devices such as blood glucose meters