TPS60240

illustrate

The TPS6024x is a switched capacitor voltage converter ideal for VCO and PLL applications that require low noise and tight tolerances. Its dual-cover design uses four ceramic capacitors and also provides ultra-low output ripple efficiency while eliminating the need for inefficient linear regulators.

The wide input supply voltage range of 2.7 V to 5.5 V makes the TPS6024x ideal for lithium-based battery applications. The TPS60240/2/3 operates as low as 1.8 V and supports a 3.3 volt, 2.7 volt, 3 V output consisting of two cell, nickel or alkaline chemicals. The operation of these devices is equally suitable for low EMI DC/DC boost conversion, of course, without the need for an inductor. The high switching frequency (160 kHz typical) facilitates small surface mount capacitors, saving board space.

characteristic

• Wide input voltage range:
  • 2.7 V, 3 V, 3.3 V output from 1.8 V to 5.5 V (TPS60240/2/3)
  • 2.7 V 5 - V output to 5.5 V (TPS60241)
• 170 uVrms zero ripple output:
  • Bandwidth from 20 Hz to 10 MHz
• Minimum number of external components
  • No inductance required
  • Only small ceramic capacitors
• Up to 90% efficiency
• Regulated 3.3V (TPS60240), 5-V (TPS60241), 3-V (TPS60243), and 2.7-V (TPS60242) outputs ± 2.5% load voltage accuracy
• Up to 25 mA output current
• Shutdown mode: 0.1 μA typical
• Thermal protection and current limiting
• Microsmall 8-pin MSOP package
• EVM available TPS60241EVM-194
• apply
  • VCO and PLL power supplies:
    • PDA phones
    • Cellular
    • PCMCIA modem