TPS60312

illustrate

The TPS6031X boost-regulated charge pump generates an output voltage from 0.9 to 4% of 3-V to 4±% or 3.3-V to ± 4% of an output voltage of 1.8 V (an alkaline, NiCd or NiMH battery).

Only five small 1 uF ceramic capacitors require a complete high efficiency DC/DC charge pump converter. To achieve high efficiency over a wide input voltage range, the conversion mode between 3x or 4x of the charge pump is automatically selected.

Output 1 (Output 1) provides 40 mA maximum, from 1 - V input to Output 2, (OUT2) is not loaded. OUT2 can provide 20 mA maximum, from 1-V input, without loading OUT1. Two outputs can be loaded at the same time, but the first current of the total output voltage multiplier cannot exceed 40 mA.

characteristic

• Regulated 3 - V or 3.3 V output voltages up to 20 mA output 0.9 V with an input voltage range of 1.8 V
• High power conversion efficiency (up to 90%) is optimized over a wide output current range of 1.2 V battery voltage
• Snooze mode at low output current to improve efficiency
• Additional output v_IThere are 2 times (output 1)
• The device quiescent current is less than 2 microamps
• Supervisors include; Open-drain or push-pull power good output
• No inductance/low EMI required
• Only five small, 1μF ceramic capacitors are required
• Microsmall 10-pin MSOP package
• apply
  • Pager
  • Battery-powered toys
  • Portable measuring instruments
  • Home automation products
  • Medical devices (like hearing aids)
  • Application metering based on MSP430 microcontroller
  • Portable smart card reader