TPS60403

illustrate

The TPS6040x is a family of non-regulated devices produced from input ranges from 1.6 V to 5.5 V to 5.5 voltage negative output voltages, devices typically consisting of 5 V or 3.3 V five, due to its wide input voltage range power rails available preregulated, two or three NiCd, NiMH or alkaline batteries, and a Li-ion battery power source they can also provide.

With only three external 1-μF capacitors, a complete DC/DC charge pump inverter is required. Packaged in a 5-pin SOT23 package, the complete converter can be built in a 50-square^millimetreboard area. The additional board area and component count are reduced by replacing Schottky diodes, which typically require the load on the integrated circuit that starts the function.

characteristic

• Invert the input voltage
• Up to 60 mA output current
• Only three small 1μF ceramic capacitors are required
• The input voltage range is from 1.6 V to 5.5 V
• Power-down mode at low output current (TPS60400) to improve efficiency
• The typical quiescent current of the device is 65 microamps
• Start-up function load with integrated active Schottky diode
• Small 5-pin SOT23 package
• The evaluation module is available for TPS60400EVM-178
• apply
  • LCD bias
  • Bias of gallium arsenide RF power amplifiers
  • Sensor power supply in portable instruments
  • Power supply for bipolar amplifiers
  • Medical devices
  • Battery-powered devices