TPS61002

illustrate

The TPS6100x device is a probo-boost converter for systems typically powered by single or two-cell nickel-cadmium (NiCd), nickel-metal hydride (NiMH), or alkaline batteries. The converter output voltage can be adjusted to a maximum of 1.5 V to 3.3 V and provides at least 100 mA output from a single cell and two 250 mA currents from a single cell. The converter starts, enters a 0.9 V supply voltage, and keeps the operating voltage at a low operating voltage of 0.8 with a supply of five at full load

The converter is based on a fixed-frequency, current-mode pulse-width modulation (PWM) controller that enters power-down mode at low load current. The current through the switch is limited to 1100 mA maximum, depending on the output voltage.

characteristic

• The supply voltage starts into one, with a low full load of 0.9 V over temperature
• Minimum 100 mA output 0.8 V supply voltage and current, 1.8 V 250 mA
• High power conversion efficiency up to 90%
• Power is saved in low output current mode to improve efficiency
• The quiescent current of the device is less than 50 microamps
• Add safety with integrated low battery voltage comparison system
• Low EMI converter (integrated ring-resistant transductor switch)
• Micro-sized 10-pin MSOP package
• Evaluation module available (TPS6100xEVM - 156)
• Applications include:
  • Single and dual battery operated products
  • MP3 player and wireless headphones
  • Pagers and cordless phones
  • Portable medical diagnostic equipment
  • Remote control