• Product Introduction

TPS61030PWPR  

A 96% efficient boost converter with 20μA Iq, adjustable, 4A switching in a TSSOP-16 package

illustrate   The TPS6103x device provides a power solution for technology-enabled products, whether it is a single lithium-ion or lithium-polymer cell, or two or three alkaline, nickel-cadmium, or nickel-metal hydride batteries. The converter produces a stable output voltage, either by adjusting an external resistor divider or by being fixed inside the chip. It offers efficient power conversion and is capable of delivering output currents up to 1 A and 5 V supply voltages as low as 1.8 V The boost converter is based on a fixed frequency, pulse-width modulation (PWM) controller using a synchronous rectifier for maximum benefit. Enter power-saving mode at the low-load current converter to maintain high efficiency over a wide load current range.   characteristic   96% efficient 1000 mAh output 1.8-V input current synchronous boost converter quiescent current of the device. 20μA (typical) Input voltage range. 1.8 V to 5.5 - V Fixed and adjustable output voltage options up to 5.5-V Power saving in low output power to improve efficiency mode Battery Low Voltage Comparator Low EMI converter (integrated anti-ringing switch) The load is disconnected during shutdown Over-temperature protection Available in a small 4 mm x 4 mm QFN-16 or TSSOP-16 package apply All single lithium or dual batteries operate for MP-3 players, PDAs, and other portable devices