illustrate

The TPS6122x family of devices provides a power solution for products powered by a single-cell, two-cell, or three-cell alkaline, nickel-cadmium or nickel-metal hydride battery, or a single-cell lithium-ion or lithium-polymer battery. The possible output current depends on the ratio of the input to output voltage. The boost converter is based on a hysteresis controller that employs synchronous rectification to obtain the lowest quiescent current efficiency and highest efficiency. The output voltage of the adjustable version can be programmed externally through a resistor divider or a fixed output voltage can be set internally. The converter can be turned off by a featured enable pin. and being turned off, battery consumption is minimized. The device measures 2 mm × 2 mm in a 6-pin SC-70 package (DCK) for small circuit layout sizes.

characteristic

• Typical working conditions with up to 95% efficiency
• 5.5μ quiescent current
• Implements an input with a load start voltage of 0.7 V
• Operating input voltages from 0.7 V to 5.5 V
• Closed by function during passing
• Minimum switching current of 200 mA
• Protection features:
  • Output overvoltage
  • superheating
  • Enter the undervoltage lock
• Adjustable output voltages from 1.8 V to 5.5 V
• Fixed output voltage version
• Small 6-pin SC-70 package
• apply
  • Battery-powered applications
    • 1 to 3 cell alkaline batteries, nickel-cadmium or nickel-metal hydride batteries
    • A section of lithium-ion or lithium elementary
  • Solar or fuel cell-powered applications
  • consumer and portable medical products
  • Personal care products