TPS63001

illustrate

The power solution for the TPS6300x device provides a product aspect powered by a two- or three-cell alkaline battery, NiCd or NiMH battery, or a single-cell Li-Ion or Li-Polymer battery. The output current can be as high as 1200 mA using a single cell Li-Ion or Li-Polymer battery and discharge it to 2.5V or less. The buck-boost converter is based on a fixed frequency, and the pulse-width modulation (PWM) controller uses synchronous rectification for maximum benefit. At low load currents, the converter enters power-down mode to maintain high efficiency over a wide range of load currents. The power-down mode can be disabled, forcing the converter to switch at a fixed frequency. The maximum average switching current is limited to a typical value of 1800 mA.

characteristic

• Up to 96% efficiency
• 1200 mA Output Current in Buck Mode at3.3V Step (VIN = 3.6V to 5.5V)
• Up to 800 mA output current boost mode at 3.3 V at 2.4 V VIN >
• Automatic decommissioning, switching boost mode between them
• The quiescent current of the device is less than 50 microamps
• Input voltage range: 1.8V to 5.5V
• Fixed and adjustable output voltage options from 1.2V to 5.5V
• Power saving in low output power to improve efficiency mode
• Force fixed frequency operation, synchronization possible
• Load disconnects during shutdown
• Over-temperature protection
• Available in small 3mm × 3mm packages in QFN-10 packages
• apply
  • All two-cell and three-cell alkaline, nickel-cadmium or nickel-metal hydride batteries or single-cell lithium battery-powered products
  • Portable audio player
  • Pocket PC
  • Cellular
  • Personal medical products
  • White LED