TPS63012

illustrate

The TPS6301x device provides a power solution powered by a two- or three-cell alkaline, nickel-cadmium or nickel-metal hydride battery, or a single-cell lithium-ion or lithium-polymer battery. Output currents can be as high as 1200 mA while using a single-cell lithium-ion or lithium-polymer battery and releasing it to 2.5 volts or less. The buck-boost converter is based on a fixed frequency, and the pulse-width modulation (PWM) controller uses synchronous rectification for maximum benefit. At low load currents, the converter enters power-down mode to maintain high efficiency over a wide range of load currents. The power-down mode can be disabled, forcing the converter to switch at a fixed frequency. The maximum average switching current is limited to a typical value of 2200 mA.

characteristic

• Up to 96% efficiency
• Output 3.3 buck mode step V voltage (VIN = 3.6 V to 5.5 V) current at 1200 mA
• Up to 800 mA outputs 3.3 V in boost mode (VIN's > 2.4 V).
• Automatic decommissioning, switching boost mode between them
• The device quiescent current is less than 50μA
• Input voltage range: 2 V to 5.5 V
• Fixed and adjustable output voltage options from 1.2 V to 5.5 V
• Power saving in low output power to improve efficiency mode
• Force fixed frequency operation, synchronization possible
• Load disconnects during shutdown
• Output overvoltage protection
• Overtemperature protection
• Available in a small 20-pin 2.14 mm ×.93 mm WCSP package
• apply
  • All two-cell and three-cell alkaline, nickel-cadmium or nickel-metal hydride batteries or single-cell lithium battery-powered products
  • Portable audio player
  • Pocket PC
  • Cellular
  • Personal medical products
  • White LED