• Product Introduction

TXB0104PWR  

4-bit bidirectional voltage level converter with automatic direction sensing and +/- 15kV ESD protection

characteristic

• One port from 1.2 V to 3.6 V and port B from 1.65 V to 5.5) V (five ≤ V CCB Common State Assessment
• V CC Isolation Function - If any V CC input GND is at high impedance, all output states are at high impedance
• OE input to V circuit reference document
• Low power consumption, 5μA maximum value to the Council
• Yuguan supports partial power-down mode operation
• Latching performance exceeds 100 JESD78 mA, Class II
• Electrostatic protection exceeds JESD 22
  • port
    • 2500-V Human Body Model (A114-B).
    • 1500 - V Lived Device Model (C101)
  • Port B
    • ± 15 kV human whole-body model (A114-B).
    • 1500 - V Lived Device Model (C101)

NanoFree is a trademark of Texas Instruments Texas

Description/Ordering Information

The 4-bit in-phase translation uses two independently configurable power rails. , port A is used to track V common country assessment. V Civil Construction will accept any B port with a power supply voltage from 1.2 V to 3.6 V for tracking V Commercial Crime Bureau. V CCB accepts any 1.65 V supply voltage from 5.5 V, this translation allows universal low voltage bidirectional for any at V 1.2 volts, 1.5 volts, 1.8 volts, 2.5 volts, 3.3 volts and 5 voltage nodes. V The Cultural Construction Commission should not exceed V Commercial Crime Bureau.

When the input of the output enable (OE) is low, all outputs are placed in a high impedance state. To ensure that in a high impedance state on or off the operating environment, the minimum value of the resistor is determined by the ability to drive the current source.

The TXB0104 is designed so that the OE input circuit is provided by the V Wenjian Association.