UCC27201-Q1

• Product introduction

The UCC27200/1 family of high-frequency N-channel MOSFET drivers includes a 120-V bootstrap diode for maximum independent input control flexibility and high-side/low-side drivers. This enables MOSFET control of N-channel half-bridge, full-bridge, dual-switch forward, active-clamped forward converters. The low-side and high-side gate drivers can be controlled independently and can turn each other on and off between 1 nanosecond.

The on-chip bootstrap diode eliminates the external discrete diode. Undervoltage lockout is provided for both high-side and low-side drivers, forcing the output drive voltage low if it falls below a specified threshold.

Two UCC2720x versions are available – the UCC27200 has a high noise-immune CMOS input threshold, and the UCC27201 has a TTL-compatible threshold.

Features of UCC27201 - Q1

• Qualified automotive applications
• From -40°C to 140°C
• High-side/Low-Side in a configuration that drives two N-channel MOSFETs
• Starting voltage 120 volts maximum
• Maximum VDD voltage 20 V
• On-chip 0.65-V ventricular fibrillation, 0.6-Ω bootstrap diode
• Operation greater than 1 MHz
• 20 ns propagation delay time
• 3 sinks, three sources of output current
• Fall time: 8 ns Rise/7-ns 1000-pF load
• 1 ns delay matching
• Undervoltage lockout is for both high-side and low-side drivers
• apply
  • Power supplies are used in telecommunications, datacom, markets and merchants
  • Half-bridge applications and full-bridge converters
  • Isolated bus architecture
  • Dual-switch forward converter
  • Active clamp forward converter
  • High voltage synchronous buck converter
  • Class D audio amplifier