UCC28089

• Product Introduction

The UCC2742x high-speed dual MOSFET drivers provide peak current to large capacitive loads. The two options are to provide standard logic - dual reverse and inverted dual drivers. They are all available in a standard SOIC-8(four) package.

Utilizing their own design to minimize through-current, these drivers provide the MOSFET switching transition process where the 4-A is most needed by Miller in the plateau region, currently. A unique bipolar and MOSFET parallel hybrid output stage also enables sagging at low current sources and supply voltages.

The UCC2742x provides operational control of applications with better drivers enabled (ENBL) functions. Pins 1 and 8 are implemented on ENBA and ENBB, previously left unused industry standard pins.

UCC27425 - Characteristics of Q1

• Qualified automotive applications
• Industry standard pins
• Enable features for each driver
• High ± 4 A current drive capability
• The unique bipolar type and CMOS drive output stage provide true high-current MOSFETs at Miller's threshold
• The power supply of the TTL/CMOS compatible input voltage is independent
• The 20 nanosecond typical rise and 15 nanosecond typical fall time is a load of 1.8-NF
• The typical propagation delay time of 25 ns is the same as the input of the input and the rise of 35 ns
• 4 - V to 15 V supply voltage
• The dual outputs can be connected in parallel for higher drive currents
• Rated from -40°C to 125°C
• apply
  • Switching power supply
  • DC/DC converter
  • motor controller
  • Line driver
  • Class D switching amplifiers