home page>Product Center> ACDC- and -DCDC-power supplies
UCC2813-2-Q1
Product images are for illustrative purposes only
Product details are welcome upon request

UCC2813-2-Q1

  • Category:ACDC- and -DCDC-power supply
  • Product Name:Automotive low-power BiCMOS current-mode PWM
  • Manufacturers:TI
  • Production Batch Number:10+
  • Encapsulation:8SOIC
  • Stock Status:There is stock
  • Stock Quantity:6000
  • Minimum order quantity: 1
  • Details:Click here to find PDF information on UCC2813-2-Q1
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

The high-speed, low-power UCC2813-0/-1/-2/-3/-4/-5 family integrated circuit contains all the control and drive components required for off-line and DC-to-DC fixed-frequency current-mode switching with minimal number of power supplies.

These devices have the same pin configuration as the UC2842/3/4/5 family, and also offer internal full-cycle soft-start and internal leading-edge current-sense input blanking value-added features.

The UCC2813-0/-1/-2/-3/-4/-5 family provides the choice of maximum duty cycle and voltage level critical. Batteries such as the UCC2813-3 and UCC2813-5 are best suited for battery-powered systems that will be under reference parts, while the higher reference and high UVLO hysteresis of the UCC2813-2 and UCC2813-4 make up for these ideal choices in offline power supplies.

characteristic
 
  • Qualified automotive applications
  • ESD protection over 200 V using the machine model (C = 200 pF, R = 0)
  • Typical supply current start-up of 100μA
  • Typical operating current of 500μA
  • to 1 MHz operation
  • Internal soft start
  • Internal soft-start failure
  • Built-in leading-edge blanking current sense signal
  • 1 totem pole output
  • Typical gate drive output response from 70 ns current sensing
  • 1.5% tolerance voltage reference
  • The same pins are for the UC3802, UC3842, and UC3842A
parameter
  UCC2813 - 2 - 1 season
topology Boost, reverse, forward
Control method Current mode
Duty cycle (max.) (%) 100
Frequency (max) (khertz) 1000
On/Off of Undervoltage Lockout Threshold (5) 12.5/8.3
Pins/Packets 8SOIC
(#) Regulated output One
Operating temperature range(°C) -40 to 125

andUCC2813-2-Q1Related ICs are:


Model Manufacturers lot number encapsulation illustrate
ISL72813SEHL/PROTO Renesas Electronics Corporation 2018+ SMD 32-channel driver circuit with integrated decoder
ISL72813SEHEV1Z Renesas Electronics Corporation 2018+ SMD 32-channel driver circuit with integrated decoder
ISL72813SEHVL Renesas Electronics Corporation 2018+ SMD 32-channel driver circuit with integrated decoder
ISL72813SEH Renesas Electronics Corporation 2018+ SMD 32-channel driver circuit with integrated decoder
ISL28130 Intersil 12+ SOT23-5 Single, micropower, low drift, rail-to-rail input and output op amps
ISL28134 intersil 12+ sop 5V ultra-low noise, rail-to-rail precision zero-drift operational amplifier
UCC2813D-2 TI 10+11+   Hong Kong spot, imported original
UCC2813 TI 00+ SOP-8 Brand new original
TPS2813P TI 06+ DIP-8 One inverting and one inverting high-speed MOSFET driver
TPS2813D TI 08+ SOP-8 One inverting and one inverting high-speed MOSFET driver
UCC2813-5-Q1 TI 10+ 8SOIC Automotive low-power BiCMOS current-mode PWM
UCC2813-5 TI 11+ 8PDIP, 8SOIC, 8TSSOP Low power economical BiCMOS current mode PWM
UCC2813-4-Q1 TI 10+ 8SOIC Automotive low-power BiCMOS current-mode PWM
UCC2813-4 TI 10+ 8PDIP, 8SOIC, 8TSSOP Low power economical BiCMOS current mode PWM
UCC2813-3-Q1 TI 10+ 8SOIC, 8TSSOP Automotive low-power BiCMOS current-mode PWM
UCC2813-3 TI 10+ 8SOIC, 8TSSOP Low power economical BiCMOS current mode PWM
UCC2813-2-Q1 TI 10+ 8SOIC Automotive low-power BiCMOS current-mode PWM
UCC2813-2 TI 10+ 8PDIP, 8SOIC, 8TSSOP Low power economical BiCMOS current mode PWM
UCC2813-1-Q1 TI 10+ 8SOIC Automotive low-power BiCMOS current-mode PWM
UCC2813-1 TI 10+ 8PDIP, 8SOIC, 8TSSOP Low power economical BiCMOS current mode PWM

Popular searches


Model Manufacturers lot number encapsulation illustrate
PW70d(2x10432Ω/83°) FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
PW70d FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches
RX2025GE1 Surio 2023+ connector Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24 Surio 2023+ connector Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMPSE06T36M2SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMP18T28M13SV0N AB Connectors 2023+ connector RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0 AB Connectors 2023+ connector Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D samtec 2023+ connector Classic PCB Header Strips, 0.100" pitch

TI brand product recommendation


Model Manufacturers lot number encapsulation illustrate
UCC2813-2 TI 10+ 8PDIP, 8SOIC, 8TSSOP Low power economical BiCMOS current mode PWM
UCC2813-1-Q1 TI 10+ 8SOIC Automotive low-power BiCMOS current-mode PWM
UCC2813-1 TI 10+ 8PDIP, 8SOIC, 8TSSOP Low power economical BiCMOS current mode PWM
UCC2813-0-Q1 TI 10+ 8SOIC Automotive low-power BiCMOS current-mode PWM
UCC2813-0 TI 10+ 8PDIP, 8SOIC, 8TSSOP Low power economical BiCMOS current mode PWM
UCC2810 TI 10+ 16PDIP, 16SOIC Dual synchronous current mode PWM
UCC2809-2 TI 10+ 8MSOP, 8SOIC, 8TSSOP Economical primary-side controller
UCC2809-1 TI 10+ 8MSOP, 8SOIC, 8TSSOP Economical primary-side controller
UCC2808A-2Q1 TI 10+ 8SOIC Automotive low-power current mode push-pull PWM
UCC2808A-2 TI 10+ 8PDIP, 8SOIC, 8TSSOP Low power current mode push-pull PWM
UCC2808A-1Q1 TI 10+ 8SOIC Automotive low power current mode push-pull PWM
UCC2808A-1 TI 10+ 8PDIP, 8SOIC, 8TSSOP Low power current mode push-pull PWM
UCC28086 TI 10+ 8PDIP, 8SOIC, 8TSSOP Current-mode push-pull PWM with programmable slope compensation
UCC28085 TI 10+ 8PDIP, 8SOIC, 8TSSOP Current-mode push-pull PWM with programmable slope compensation
UCC28084 TI 10+ 8PDIP, 8SOIC, 8TSSOP Current-mode push-pull PWM with programmable slope compensation
UCC28083 TI 09+ 8PDIP, 8SOIC, 8TSSOP Current-mode push-pull PWM with programmable slope compensation
UCC2808-2 TI 10+ 8PDIP, 8SOIC Low power current mode push-pull PWM
UCC2808-1 TI 10+ 8PDIP, 8SOIC Low power current mode push-pull PWM
UCC2807-3 TI 10+ 8SOIC Programmable maximum duty cycle PWM controller
UCC2807-2 TI 10+ 8PDIP, 8SOIC Programmable maximum duty cycle PWM controller

Categorical search