home page>Product Center> Microcontroller
UCC28810
Product images are for illustrative purposes only
Product details are welcome upon request

UCC28810

  • Category:Microcontrollers
  • Product Name:LED lighting power controller
  • Manufacturers:TI
  • Production Batch Number:10+
  • Encapsulation:SOP
  • Stock Status:There is stock
  • Stock Quantity:10000
  • Minimum order quantity: 1
  • Details:Click here to find a pdf of the UCC28810
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction
The UCC28810 and UCC28811 are general lighting power controllers for low to medium power lumens where power factor correction and electromagnetic compatibility are required. It is designed to control flyback, buck or boost converter critical conduction mode operation. It employs a feedback error handling in which a simple command generates a transimpedance amplifier proportional to the input voltage current reference voltage generator, a current detector (PWM) comparator, PWM logic, and a totem pole driver to drive an external FET.

In critical conduction mode operation, the PWM circuit self-oscillating and conducting is being governed by a transformer zero-energy detector (non PIN) and shutdown is being governed by a current-sense comparator.

characteristic
 
  • Transition AC input low execution cost mode controller LED lighting applications
  • A single-stage power factor correction LED driver is realized
  • Enhanced transient response slew rate comparison
  • Conventional dimming interface
  • Precise and tight output regulation internal Vnumberfor
  • Two UVLO options
  • Overvoltage protection (OVP), feedback open-circuit protection, and enable circuitry
  • ± 750 mA peak gate drive current
  • Low start-up and operating current
  • Lead-Free (Pb) - Lead-free package
  • apply
    • AC input for high brightness LED applications for general lighting
    • Industrial, commercial and residential lighting fixtures
    • Outdoor lighting: LED lighting fixtures for streets, laneways, parking lots, buildings and decorations

andUCC28810Related ICs are:


Model Manufacturers lot number encapsulation illustrate
UCC28810 TI 10+ SOP LED lighting power controller
UCC28810 TI 10+ SOP LED lighting power controller
UCC28810 TI 10+ SOP LED lighting power controller

Popular searches


Model Manufacturers lot number encapsulation illustrate
PW70d(2x10432Ω/83°) FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
PW70d FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches
RX2025GE1 Surio 2023+ connector Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24 Surio 2023+ connector Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMPSE06T36M2SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMP18T28M13SV0N AB Connectors 2023+ connector RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0 AB Connectors 2023+ connector Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D samtec 2023+ connector Classic PCB Header Strips, 0.100" pitch

TI brand product recommendation


Model Manufacturers lot number encapsulation illustrate
TPS92001 TI 10+ SOP Universal LED lighting PWM controller with 10V start-up threshold
TPS61166 TI 10+ SOP White LED driver with integrated power diode and fast burst dimming mode
TPS61165 TI 10+ SOP White LED driver in a 2mm × 2mm QFN package
TPS61161A TI 10+ SOP White LED driver with PWM brightness control in a 2mm × 2mm package. Up to 10 LEDs connected in series
TPS61161-Q1 TI 10+ SOP Automotive white LED driver with digital and PWM brightness control in a 2mm × 2mm QFN package
TPS61161 TI 10+ SOP White LED driver with digital and PWM brightness control in a 2mm × 2mm QFN package
TPS61160A TI 10+ SOP White LED driver with PWM brightness control in a 2mm × 2mm package. Up to 10 LEDs connected in series
TPS61160 TI 10+ SOP White LED driver with digital and PWM brightness control in a 2mm x 2mm package
TPS61151 TI 10+ SOP TPS61150/1 datasheet
TPS61150A TI 10+ SOP Dual Output Boost WLED Driver Using Single Inductor
TPS61150 TI 10+ SOP Dual 2 x 27V, 700mA switches with single inductor white LED drivers (up to 2 x 6) 1.2MHz boost converters
TPS61141 TI 10+ SOP TPS61140/1 datasheet
TPS61140 TI 10+ SOP TPS61140/1 datasheet
TPS61081 TI 10+ SOP 27V, 1.2A switch, 1.2MHz boost converter with integrated power diode
TPS61080 TI 10+ SOP 27V, 500mA switch, 1.2MHz boost converter with integrated power diode
TPS61069B0 TI 10+ SOP Constant current white LED driver with PWM brightness control and load disconnect switch
TPS61062 TI 10+ SOP 24V, 400mA switch, 1MHz boost converter with white LED brightness control supply
TPS61061 TI 10+ SOP 19V 400mA switched 1MHz boost converter with brightness control for white LED power supplies
TPS61060 TI 10+ SOP 15V, 400mA switch with white LED brightness control supply, 1MHz boost converter
TPS61059 TI 10+ SOP High-power single white LED driver with 1.5A switching in a 3x3 QFN package

Categorical search