Model |
Manufacturers |
lot number |
encapsulation |
illustrate |
X5163S8-2.7A |
XICOR |
N/A |
N/A |
Programmable watchdog, power-on reset, programmable low VCC reset, low reset output, 16K SPI interface EEPROM |
X5043P-2.7 |
XICOR |
05+ |
DIP8 |
Programmable watchdog, power-on reset, configurable low VCC reset, low reset output, 4K bit SPI interface EEPROM |
X5045V14I-2.7A |
XICOR |
07+ |
TSSOP-14 |
Brand new original |
X4045S8I2.7A |
XICOR |
N/A |
N/A |
Programmable watchdog, power-on reset, programmable low VCC reset, high reset output, 4K bit EEPROM |
X9314WS-3T1 |
XICOR |
N/A |
N/A |
Single DCP, 32-tap, 10K ohms |
X1227S8I-2.7 |
XICOR |
N/A |
N/A |
Real-time clock/calendar, dual query alarm, on-chip oscillator compensation circuit, programmable watchdog + power-up/low reset, 4K bit EEPROM |
X24C04P |
XICOR |
02+ |
SOP-8 |
Brand new original |
X24C45 |
XICOR |
01+ |
SOP-8 |
Brand new original |
X4045S8-4.5A |
XICOR |
N/A |
N/A |
Programmable watchdog, power-on reset, programmable low VCC reset, high reset output, 4K bit I2CEEPROM |
X9312WSI |
XICOR |
N/A |
N/A |
Single 100-tap DCP, tap position power down automatically saved |
X9241AMP |
XICOR |
04+ |
DIP20 |
64-tap DCPS, four DCP, tap position power down automatic saving, can partially replace X9241 |
X25C02 |
XICOR |
96+ |
SOP/8 |
Brand new inventory |
X9241MP |
XICOR |
00+ |
DIP |
Brand new original |
X9455WV24-2.7 |
XICOR |
N/A |
N/A |
broker |
X40421S14I-C |
XICOR |
N/A |
N/A |
Configurable dual voltage monitoring, selectable power-on reset pulse width, programmable watchdog cycle, manual reset input, backup battery switching, independent watchdog output |
X9313ZM-3T1 |
XICOR |
N/A |
N/A |
Single 32-tap DCP, tap position brownout protection |
X2444P |
XICOR |
06+ |
DIP-8 |
Brand new original |
X9315US |
XICOR |
N/A |
N/A |
Low power consumption, low noise, single 32-tap DCP, tap position is automatically saved when power down |
X9511WP |
XICOR |
03+ |
DIP-8 |
Single 32-tap DCP, tap position brownout protection |
X9C503SI |
XICOR |
06+ |
SOP-8 |
Single 100-tap DCP, tap position power down automatically saved |