XTEH-7L-190(M)
Brief introduction: The typical characteristics of the XTEH series pressure sensors are a particularly wide temperature range, which is ideal for the testing of turbine engines, especially for reversing and strengthening stability control, and its robustness is also suitable for other industrial applications. ● Leadless technology; ● High natural frequency; ● High temperature capability: -55°C to 400°C; ●Suitable for reversing fitting
XTEH-7L-190(M) series
● 无引线技术
● 高固有频率
● 高温能力：-55℃到400℃
● 适用于逆转切合
The XTEH series of pressure sensors is characterized by a particularly wide temperature range, which is ideal for the testing of turbine engines, especially for reversing and strengthening stability control, and its robust durability is also suitable for other industrial applications.
lose
enter
Pressure range
3.5
7
14
21
35
70 Bar
50
100
200
300
500
1000 psi
Working mode
Absolute pressure and sealed gauge pressure
Overload pressure
2 times the rated pressure
Rupture pressure
3 times the rated pressure
pressure medium
Any medium compatible with SiO2 and 15-5PH stainless steel
Rated excitation voltage
10VDC/AC
Maximum excitation voltage
15VDC/AC
Input impedance
1000Ω (Min)
lose
go out
Output impedance
1000Ω (Rating)
Full Scale Output (FSO)
100mV (Rating)
Zero bit imbalance
±5mV (typical)
synthesis
Nonlinearity, hysteresis, repeatability
0.25% FS BFSL (typical)
Discrimination
Infinitely small
Natural Frequency (kHz) (Typical)
500
600
750
850
1000
1200
Acceleration sensitivity
%FS/g
vertical
1.5×10-4
1.0×10-4
7.0×10-5
5.0×10-5
3.0×10-5
2.0×10-5
Transverse
3.0×10-5
2.0×10-5
1.5×10-5
1.0×10-5
6.0×10-6
4.0×10-6
Insulation resistance
≥100MΩ (at 50VDC)
environmental conditions
Operating temperature range
Pressure Sensing Zone: -55°C to 400°C (-65°F to 750°F), Conductor Zone: -55°C to 274°C (-65°F to 525°F)
Compensate for the temperature range
25°C to 343°C (80°F to 650°F)
Hot zero drift
±1.5% FS /100°F (typical)
Thermal sensitive drift
±1.5% FS /100°F (typical)
steady-state acceleration and linear vibration
1 000g sine wave
Physical properties
Electrical connections
4 x 30AWG shielded wires, 30 inches long in front of the compensation module and 24 inches long in the rear of the compensation module
weight
8 g (rated), excluding components and connecting wires
Sensitive principle
Wheatstone bridge dielectric insulating silicon stacked silicon leadless technology
Mounting torque
Up to 15 inches. pound