|
Brief introduction: The XTL-76A series pressure sensors utilize Kulite's most advanced pressure-sensitive technologies – direct isolation, silicon stacking, and leadless technology for use in harsh environments. Full range output up to 100mV at 10VDC excitation voltage. Small structure, compact and robust form factor, temperature capability up to 204°C can be used in limited spaces; The high natural frequency allows it to be used in the field of dynamic response monitoring. ● Exquisite shape; ● Leadless technology; ● Small structure; ● Advanced solutions for industrial and aviation industries
XTL-76A-312(M) series
● Sophisticated shape
● Leadless technology
● Small structure
● Advanced solutions for industrial and aviation industries
The XTL-76A Series pressure sensors utilize Kulite's most advanced pressure-sensitive technologies—direct isolation, silicon stacking, and leadless technology, allowing them to be used in harsh environments. Full range output up to 100mV at 10VDC excitation voltage. Small structure, compact and robust form factor, temperature capability up to 204°C can be used in limited spaces; The high natural frequency allows it to be used in the field of dynamic response monitoring.
lose
enter
Pressure range
1.7
3.5
7
17
35
70
140
210 Bar
25
50
100
250
500
1000
2000
3000 psi
Working mode
Absolute pressure, gauge pressure, sealing gauge pressure, differential pressure
Overload pressure
2 times the rated pressure
Rupture pressure
3x pressure rating, up to 6000psi (420Bar)
pressure medium
Any medium compatible with SiO2 and 15-5PH stainless steel
Rated excitation voltage
10VDC/AC
Maximum excitation voltage
15VDC/AC
Input impedance
1000Ω (Min)
lose
go out
Output impedance
1000Ω (Rating)
Full Scale Output (FSO)
100mV (Rating)
Zero bit imbalance
±5mV (typical)
synthesis
Nonlinearity, hysteresis, repeatability
0.1% FS BFSL (typical)
Discrimination
Infinitely small
Natural Frequency (kHz)
(Typical)
400
500
600
750
1000
1200
1400
1600
Acceleration sensitivity
%FS/g
vertical
3.0×10-4
1.5×10-4
1.0×10-4
5.0×10-5
3.0×10-5
2.0×10-5
1.5×10-5
1.0×10-5
Transverse
6.0×10-5
3.0×10-5
2.0×10-5
1.0×10-5
6.0×10-6
4.0×10-6
2.0×10-6
1.0×10-6
Insulation resistance
≥100MΩ (at 50VDC)
environmental conditions
Operating temperature range
-55°C to 204°C (-65°F to 400°F)
Compensate for the temperature range
25°C to 80°C (80°F to 180°F), any 100°F range over the required operating temperature range
Hot zero drift
±1% FS /100°F (typical)
Thermal sensitive drift
±1% FS /100°F (typical)
Linear vibration
50g peak sine wave 10 to 2000Hz
humidity
100% relative humidity
Mechanical vibration
100g half-sine wave lasts for 1 millisecond
Physical properties
Electrical connections
4 x 26AWG fiber shielded wires, 24" long
weight
4 grams (rating), excluding components and connecting wires
Sensitive principle
Wheatstone bridge dielectric insulating silicon stacked silicon leadless technology
Mounting torque
Up to 15 inches. pound
|