| lose enter | Pressure range | | 1.0 | 1.7 | 3.5 | 7 | 17 | 35 | 70 | 210Bar |
| 15 | 25 | 50 | 100 | 250 | 500 | 1000 | 3000Psi |
| Working mode | Absolute, sealed gauge |
| Overload pressure | 2 times rated pressure up to 4500psi (315Bar) |
| Rupture pressure | 3 times rated pressure up to 4500psi (315Bar) |
| Pressure medium | Anything with SiO2and 15-5PH stainless steel compatible media |
| Rated excitation voltage | 10VDC |
| Input impedance | 1000Ω (min) |
| lose go out | Output impedance | 1000Ω (nominal) |
| Full-scale output (FSO) | 100mV (nominal) |
| Zero imbalance | ±5mV (typical) |
| synthesis Nonlinearity, hysteresis, repeatability | 0.1% FS BFSL (typical) |
| Resolution | Infinitesimal |
| Natural frequency (kHz) (typical) | Approximately 160kHz |
| Acceleration sensitivity %FS/g | vertical | 5.0×10-4
| 3.0×10-4
| 1.5×10-4
| 1.0×10-4
| 5.0×10-5
| 3.0×10-5
| 2.0×10-5
| 1.0×10-5
|
| Transverse | 1.0×10-4
| 6.0×10-5
| 3.0×10-5
| 2.0×10-5
| 1.0×10-5
| 6.0×10-6
| 4.0×10-6
| 2.0×10-6
|
| Insulation resistance | ≥100MΩ at 50VDC |
| Environmental conditions | Operating temperature range | -55°C to 204°C (-65°F to 400°F) |
| Compensate for temperature range | -40°C to 175°C (-40°F to 350°F) |
| Comprehensive accuracy within the temperature compensation range | ±2%, including thermal sensitivity drift, thermal zero drift, and static and experimental errors |
| Linear vibration | 100g peak, sine wave to 5000Hz |
| humidity | 100%RH |
| Mechanical vibration | 100g half sine wave for 1 millisecond |
| Physical properties | Electrical connection | The 4-core 30AWG silver-plated, PTFE-wrapped conductor is 60 inches long |
| weight | 5 g (nominal), excluding wires |
| Sensitivity principle | Wheatstone bridge dielectric insulated silicon stacked silicon leadless technology |
| Installation torque | Up to 15 inches. pound |