home page>Product Center> 4-20mA regulation
XTR105
Product images are for illustrative purposes only
Product details are welcome upon request

XTR105

  • Category:4-20mA regulation
  • Product Name:4 - 20mA current transmitter sensor excitation and linearity
  • Manufacturers:TI
  • Production Batch Number:09+10+
  • Encapsulation:14PDIP 14SOIC
  • Stock Status:There is stock
  • Stock Quantity:2000
  • Minimum order quantity: 1
  • Details:Click here to find PDF information on XTR105
  • Click Request a quote
Contact usOnline customer service1 Online customer service2 Click Send email
  • Product introduction

The XTR105 is a monolithic 4 - 20mA, 2-wire current transmitter with two precision current sources. It provides complete current excitation on a single integrated circuit of platinum resistance temperature sensors and bridges, instrumentation amplifiers, and current output circuits.

Linear circuits provide versatile second-order correction of RTDs, typically achieving 40:1 linearity improvements.

The gain of the instrumentation amplifier is configurable over a wide range of temperature or pressure measurements. The current total transmitter adjustment error is low enough to allow adjustment in many applications. This includes zero output current drift, span drift, and nonlinearity. The supply voltage of the XTR105 drops to 7 during cyclic operation.

characteristic
 
  • Low adjustment error
  • Two precision current sources: 800 μA each
  • linearization
  • 2 or 3-wire RTD operation
  • Low offset drift: 0.4μV/°C
  • Low output current noise: 30NApolypropylene
  • High public sector reform: 110dB minimum
  • High CMR: 86dB minimum
  • Wide supply range: 7.5V to 36V
  • Dial-14 and SO-14 packages
  • apply
    • Industrial process control
    • Factory automation
    • Remote data acquisition of SCADA systems
    • Remote temperature and pressure sensors
parameter
  XTR105
Sensor excitation Two 800uA sources
Loop voltage(V) 7.5 to 36
Full-scale input range 5mV to 1V
Nonlinearity (max.) (%) 0.01
Maximum output with zero errors (+/-)()(UA). 25
and (min) (v) 7.5
and (maximum) (v) 36
Auxiliary Output Voltage(V) 5.1
Range error (max) (%) 0.2
Maximum offset voltage (+/-)((UV) 25
Maximum offset voltage drift (+/-)((UV/Celsius) 1.5
Common-mode rejection ratio, 60 Hz (min) (dB) 86
Pins/Packets 14PDIP,14SOIC

andXTR105Related ICs are:


Model Manufacturers lot number encapsulation illustrate
XTR112 TI 08+ 14SOIC 4 - 20mA current transmitter with sensor excitation and linearization
XTR111 TI 10+ 10MSOP-PowerPAD 10SON Precision voltage and current converters/transmitters
XTR110 TI 10+ 16PDIP 16SOIC Precision voltage-to-current converters/transmitters
XTR108 TI 10+ 24SSOP/QSOP 4 - 20mA, 2-wire transmitter, 'smart' air conditioner programmable signal
XTR106 TI 10+ 24SSOP/QSOP The XTR106 is a low-cost, single-chip 4-20mA, two-wire current transmitter designed bridge. It provides complete bridge excitation voltage (2.5V or 5V reference), instrumentation amplifier, sensor linearization, and current output circuitry. Supply current to the additional external input circuit from the VREG pin. The instrumentation amplifier can be reused over a wide gain range and accommodates input signal types and various transmissions
XTR101 TI 08+ 14PDIP 16SOIC High precision, low drift 4 - 20mA two-wire transmitter
RCV420 TI 10+ 16PDIP Precision 4mA to 20mA current loop receiver
TPS54917 TI 2011+ VQFN-34 3V to 4V input, 9A synchronous buck converter
TPS54900 TI 11+ TSSOP16 Quad 100mA buck converter with serial control output voltage
TPS54880 TI 10+ HTSSOP28 5V input, 8A synchronous buck converter

Popular searches


Model Manufacturers lot number encapsulation illustrate
PW70d(2x10432Ω/83°) FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
PW70d FSG 2023+ potentiometer PW70D(2*1043Ω 1%/83°)(1700Z04-257.106)
S34ML16G202BHI000 Flip Electronics 2051+ 63BGA 16 Gb, 3 V, 4-bit ECC, x8 I/O, SLC NAND Flash Memory for Embedded
FRCIR06RGG18-20S-F80-V0-M20-1.5F ITTVEAM 2023+ connector Connectors, Circular Connectors, Circular Plugs & Receptacles
CL1215-02P72ET-U2 Schaltbau 2023+ Contactors CL1215/02 P 72ET-U2 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
CL1115-02P72ET-U2 Schaltbau 2023+ Contactors 1, 2 and 3 pole AC and DC NO contactors for voltages up to 1,500 V
D-U204N-KLGQ Mors Smitt 2023+ Relays No magnetic arc blow-out
D-U204N-KLCQ Mors Smitt 2023+ Relays No magnetic arc blow-out
MIP30F00830-S1048 Amphenol Positronic 2023+ connector MIP series connectors
C163C/110EV-R1 Schaltebao 2023+ Contactors Contactors
F670-H4V-XUU LEACH 2023+ Relays F670-H4V-XUU+SHKE470-110-AD
F670-H4VP-XUXU LEACH 2023+ Relays F670-H4VP-XUXU+SFE670-1-1
AZ16-12ZI-B1-1747-M20 SCHMERSAL 2023+ switch Safety switches
RX2025GE1 Surio 2023+ connector Extract, Remove, and Insert Tools Contact extraction tool #16
5106.021.09.24 Surio 2023+ connector Extract, remove, and insert tools Extract tool with pop-up
ABMPSE06T28M4SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMPSE06T36M2SV0N AB Connectors 2023+ connector Plug with RFI Ground
ABMP18T28M13SV0N AB Connectors 2023+ connector RAIL AND MILITARY LAND SYSTEMS
ABCIRHSE06JE1812SCNF80M32V0 AB Connectors 2023+ connector Halogen Free Bayonet Lock Connector Series
TSW-101-06-LM-D samtec 2023+ connector Classic PCB Header Strips, 0.100" pitch

TI brand product recommendation


Model Manufacturers lot number encapsulation illustrate
XTR101 TI 08+ 14PDIP 16SOIC High precision, low drift 4 - 20mA two-wire transmitter
RCV420 TI 10+ 16PDIP Precision 4mA to 20mA current loop receiver
TPS54917 TI 2011+ VQFN-34 3V to 4V input, 9A synchronous buck converter
TPS54900 TI 11+ TSSOP16 Quad 100mA buck converter with serial control output voltage
TPS54880 TI 10+ HTSSOP28 5V input, 8A synchronous buck converter
TPS54873 TI 10+ HTSSOP28 The sucked 5V input, 8A synchronous buck converter is disabled during startup
TPS54872 TI 10+ HTSSOP28 8A active bus termination/DDR memory DC/DC converter
TPS54810 TI 10+ HTSSOP28 5V input, 8A synchronous buck converter
TPS54680 TI 10+ TSSOP28 Low input voltage 6A synchronous buck converter for sequencing
TPS54673 TI 07+ TSSOP-28 The sucked low input voltage 6A synchronous buck converter is disabled during startup
TPS54622 TI 10+ 14QFN 4.5V to 17V input, 6A synchronous buck converter with hiccup current limit
TPS54620 TI 11+ VQFN14 4.5V to 17V input, 6A synchronous buck converter
TPS54618 TI 10+ 16WQFN 2.95V to 6V input, 6A synchronous buck converter
TPS54617 TI 2010+ 34-VQFN 3V to 6V input, 6A synchronous buck converter
TPS54616 TI 10+ HTSSOP28 Low input voltage 6A synchronous buck converter with 3.3V output
TPS54614 TI 2010+ HTSSOP28 3V to 6V, 6A synchronous buck converter with 1.8V output
TPS54613 TI 10+ HTSSOP-28 Low input voltage 6A synchronous buck converter with 1.5V output
TPS54612 TI 1006+ TSSOP28 Low input voltage 6A synchronous buck converter with 1.2V output
TPS54611 TI 10+ HTSSOP28 Low input voltage 6A synchronous buck converter with 0.9V output
TPS54550 TI 09+ TSSOP 4.5V to 20V input, 5V synchronous buck converter with low-side FET gate drive

Categorical search