illustrate

The TAS5152 is the third generation, high performance, with a complete protection system integrated stereo digital amplifier power stage. The TAS5152 is capable of driving 4 -Bridge up to load (BTL) with 125 watts per channel of low-noise output integration, low THD+N performance, and low power idle.

A low-cost, hi-fi sound system that can be used due to the use of TI chipsets, modulators (e.g., TAS5508) and TAS5152. The system requires only a simple passive LC filter to demodulate and prove to be EMI compliant to provide high-quality, high-efficiency audio amplification. This device requires two power supplies, a GVDD resistor of 12 V, and a PVDD of 35 PVDD five. The TAS5152 does not require a power-up sequence due to internal power-up reset.

characteristic

• 2× 125 at 10% THD+ to 4 N W -offline
• 2 × 98,10% THD + to 6 Newton W -offline
• 2 × 76,10% THD + to 8 n W -offline
• 4 × 45 10% THD + to 3 N W -southeast
• 4 × 35 10% THD+ to 4 N W -southeast
• 1 × 192 10% THD + to 3 n W -PBTL
• 1 × 240 10% THD+ to 2 N W -PBTL
• "100 dB signal-to-noise ratio (A-weighted)
• "0.1% THD + n at 1 watt
• Thermally Enhanced Package Options:
  • DKD (36-pin PSOP3)
• High efficiency power stage ("90%) with 140 meters Output MOSFETs
• There is no protection power sequence when powering up, reset, and power-up
• Integrated self-protection circuitry, including:
  • Undervoltage
  • superheating
  • overload
  • short circuit
• Error reporting
• When electromagnetically compatible, the design of the recommended system is recommended