LT1366

• Product introduction

LT1366 Dual-channel, precision, track-to-orbit input; And; Output op amp

peculiarity

• The input common-mode range includes two supply rails The input common-mode range includes two supply rails
• Rail-to-rail output swing Rail-to-rail output swing
• Low input offset voltage: 150μV Low input offset voltage: 150μV
• High common-mode rejection ratio: 90dBHigh common-mode rejection ratio: 90dB
• High A_VOL:>1V/μV (drives 10k load)High and_{VOL：1V/μV（}Drive 10K load)
• Low input bias current: 10nALow input bias current: 10nA
• Wide supply range: 1.8V to ±15VWide supply range: 1.8V to ±15V
• Low supply current: 375μA per amplifierLow Supply Current: 375μA per amplifier
• High output drive: 30mAHigh output drive current: 30mA
• 400kHz gain-bandwidth product400kHz gain-bandwidth product
• Slew rate: 0.13V/μsSlew rate: 0.13V/μs
• Stable with capacitive loads up to 1000pFStable with capacitive loads up to 1000pF

description

LT^®1366/LT1367/LT1368/LT1369target^{LT®1366/LT1367/LT1368/LT1369} It maintains its characteristics over a supply range of 1.8V to 36V. Its operating specifications are designed for 3V, 5V, and ±15V supplies. The input offset voltage is typically 150μV and provides an open-loop gain AVOL of 1,000,000 when driving a 10k load. Common-mode rejection is typically 90dB over the entire rail-to-rail input range, while power supply rejection is 110dB.Its characteristics are maintained over a supply range of 1.8V to 36V. Its operating specifications are formulated for 3V, 5V and ±15V power supplies. input; The offset voltage difference is typically 150μV and provides an open-loop gain AVOL of millions when driving a 10K load. Suppression of common mode throughout orbit-to-orbit input; The typical value in the range is 90dB, while the power supply rejection is 110dB.

The LT1366/LT1367 use traditional compensation circuitry to ensure stability at capacitive loads ≤1000pF. The compensation circuit used in the LT1368/LT1369 requires 0.1μFThe LT1366/LT1367 use traditional compensation circuitry to ensure stability at capacitive loads ≤ 1000pF. The compensation function used in the LT1368/LT1369 Engineering Department requires a 0.1μF A/D converters are advantageous.What is advantageous when A/D converter

The LT1366/LT1368 are available in plastic 8-lead PDIP and 8-lead SO packages in standard dual op amp pin configurations. The LT1367/LT1369 are available in a standard quad op amp pinout configuration and are available in 14-lead plastic SOThe LT1366/LT1368 are available in plastic 8-lead PDIP packages and 8-lead SO packages in standard dual op amp pin configurations. The LT1367/LT1369 are available in a standard quad, channel op amp pinout pin configuration and are available in 14-lead plastic SO

apply

• Rail-to-rail buffer amplifierRail-to-rail buffer amplifier
• Low voltage signal processingLow voltage signal processing
• Supply current sensing on either railSupply current sensing on either rail
• Drive an A/D converterDriven A/D converter