EL2142

• Differential input range ±2.3VDifferential input range ± 2.3V
• 150MHz 3dB bandwidth150MHz 3dB bandwidth
• 400V/µs slewrate400V/μsslewrate
• ±5V supplies or single supply± 5V power supply or single supply
• 50mA minimum output currentMinimum output current of 50mA
• Output swing (100Ω load) to within 1.5V of suppliesThe output swing (100Ω load) is supplied within 1.5V
• Low power-11mA typical supply currentLow power supply current is 11mA typical
• Pb-free available (RoHS compliant)Lead-free available (RoHS compliant)

The EL2142 is a very high bandwidth amplifier designed to extract the difference signal from noisy environments, and thus primarily targeted for applications such as receiving signals from twisted pair lines, or any application where common mode noise injection is likely to occur.The EL2142 is a very high bandwidth amplifier designed to be able to differential signals from noisy environments, thus primarily targeting applications such as receiving twisted pairs, or any application where common-mode noise injection is likely to occur signals.

The EL2142 is stable for a gain of one, and requires two external resistors to set the voltage gain.The EL2142 is stable with a gain of 1 and requires two external resistors to set the voltage gain.

The output common mode level is set by the reference pin (V_REF), which has a -3dB bandwidth of over 100MHz.The output common-mode level is determined by the reference pin (V_numberIts -3dB bandwidth is more than 100MHz. Generally, this pin is grounded, but it can be tied to any voltage reference.Generally, this pin is grounded, but it can be connected to any voltage reference.

The output can deliver a minimum of ±50mA and is short circuit protected to withstand a temporary overload condition.The outputs can provide a range of ± 50mA minimum, short-circuit protection against temporary overload conditions.